GSM Based Home Security System using MQ-2 gas/Smoke sensor, Arduino uno and GSM module Sim 900A
20 هزار بار بازدید -
6 سال پیش
-
Hello guys,In this video we
Hello guys,In this video we will going to learn how to make a home security system using arduino and gsm module SIM900A
In project we call the home owner if there is gas leakage by any fault as well we also send alret SMS with desried text,
if by any case gas leakages then buzzer sounds, red led glows as message and call also make by gsm module.
download and modify the code according to your need and use it in your project.
This code is little different from that shown in video but it will work in same manner as in video
connect rx of gsm module to tx arduino ,tx to rx of arduino and gnd to gnd
connect red led to digitalpin 13 of arduino , greenled to pin no 11
connect buzzer to pin no 10
and input mq2 sensor to A0 of Arduino
and change the thresold value of sensor according to your sensitivity need.
Click here to download the code and schematic (https://github.com/technolabelectroni...)
for this project we need
1.GSM module(SIM900a)
2. Arduino(nano,uno,mega anyone)
4. one red and one green led
5. some jumper wires
6. buzzer
7. MQ-2 gas sensor
If you like my video please
Like,Comment and Share
SIM900A GSM Module and Arduino: Sending and Receiving SMS Using AT Commands.
SIM900A GSM Module and Arduino: Sendi...
Subscribe my channel for more updates & click on the bell icon for notification
technolabcreation
Checkout my others videos
GSM Based Home Security System using MQ-2 gas/Smoke sensor, Arduino uno and GSM module Sim 900A
GSM Based Home Security System using ...
Cancel Save changes Control Home Appliances Using GSM module SIM 900A by sending an SMS.
Control Home Appliances Using #GSM mo...
Rename and Change Passward of HC-05 Bluetooth Module||DIY
Rename and Change Passward of HC-05 B...
How to make a clap switch at home using Arduino||Control your light,fan just using clap
How to make a clap switch at home usi...
Thanks for watching
In project we call the home owner if there is gas leakage by any fault as well we also send alret SMS with desried text,
if by any case gas leakages then buzzer sounds, red led glows as message and call also make by gsm module.
download and modify the code according to your need and use it in your project.
This code is little different from that shown in video but it will work in same manner as in video
connect rx of gsm module to tx arduino ,tx to rx of arduino and gnd to gnd
connect red led to digitalpin 13 of arduino , greenled to pin no 11
connect buzzer to pin no 10
and input mq2 sensor to A0 of Arduino
and change the thresold value of sensor according to your sensitivity need.
Click here to download the code and schematic (https://github.com/technolabelectroni...)
for this project we need
1.GSM module(SIM900a)
2. Arduino(nano,uno,mega anyone)
4. one red and one green led
5. some jumper wires
6. buzzer
7. MQ-2 gas sensor
If you like my video please
Like,Comment and Share
SIM900A GSM Module and Arduino: Sending and Receiving SMS Using AT Commands.
SIM900A GSM Module and Arduino: Sendi...
Subscribe my channel for more updates & click on the bell icon for notification
technolabcreation
Checkout my others videos
GSM Based Home Security System using MQ-2 gas/Smoke sensor, Arduino uno and GSM module Sim 900A
GSM Based Home Security System using ...
Cancel Save changes Control Home Appliances Using GSM module SIM 900A by sending an SMS.
Control Home Appliances Using #GSM mo...
Rename and Change Passward of HC-05 Bluetooth Module||DIY
Rename and Change Passward of HC-05 B...
How to make a clap switch at home using Arduino||Control your light,fan just using clap
How to make a clap switch at home usi...
Thanks for watching
6 سال پیش
در تاریخ 1397/03/14 منتشر شده
است.
20,051
بـار بازدید شده