Waste oil burner with reflector (making process) Part 2.

I don't have a device to measure the temperature, but this can melt copper wire. 9.5cm burner length. The function of the reflector is to reduce some of the speed of the oil mist so that the flame at the end of the burner remains / does not escape. To be easily ignited, oil mist bursts must be right in the middle of the burner funnel hole.
(How to Make) Waste Oil Burner using Soft Drink Bottles : (How to Make) Waste Oil Burner using ...

• #science_technology
• #blow_torch
• #cara_membuat_kompor_oli_bekas
• #cara_membut_pemanas_oven
• #cara_membuat_pemanas_ayam
• #tungki_sederhana
• #tungku_praktis
• #tungku_hemat_bahan_bakar
• #kompor_hemat_energi
• #jet_stove
• #jet_engine
• #induction_cooker
• #air_heater
• #induction_heater
• #pemanas_induksi
• #kompor_kemping
• #camper_stove
• #kompor_peleburan
• #tungku_peleburan_logam
• #metal_casting
• #metal_foundry
• #blower_solar
• #wood_burner
• #gasification_burner