Silicone bowl mold for resin, epoxy and woodturning
7 هزار بار بازدید -
3 سال پیش
-
Welcome back!! In this video
Welcome back!! In this video I'll be doing a major crash course in making a silicone bowl mold for resin and epoxy for woodturning! I've been wanting a silicone mold that I could cast all epoxy and resin bowls with that would allow more options for turning on the lathe. I've always had a thing for resin and it's possibilities and now, I can really get down to business!
I used Alumilite mold putty 15 to create a thin mold that would have worked out if the original wood bowl was smaller but I made it a bit too big lol. So I ended up using Alumilite plat 25 silicone to correct my failure. It still needed something to seal where the seam was since it was only 1/2" thick. Which isn't much to seal up that much resin.
But like said in the video, this is a learning process and just a crash course. But now I know and knowing is the first step to better processes!
I used Alumilite amazing clear resin with eye candy mica powder to fill it with. Total ammount of resin used was 2.5L or 0.6 gallons. Which isn't that bad.
Don't forget, you can used code EPPS10 for 10% off Alumilite products and code EPPS15 for 15% off Eye Candy mica powder.
Thanks for watching!
Use code EPPS10 for 10% off your first purchase of Alumilite epoxy
Use code EPPS15 for 15% off your purchase of Eye Candy mica powder
Use code EPPS10 for 10% off your purchase of Starbond Adhesives
Alumilite Epoxy www.alumilite.com/?aff=7
Eye Candy Mica powder eyecandypigments.com/EppsCreations
Starbond Adhesieves bit.ly/3k6BM7F
Instagram www.instagram.com/eppscreations/
Facebook www.facebook.com/eppscreations/
Etsy shop www.etsy.com/shop/EppsCreationsStore
Linktree linktr.ee/eppscreations
Keda dye www.kedadyeinc.com/
Shed life stabilizing resin shed.life/sos-3-0/
www.epidemicsound.com/?_us=adwords_brand&_usx=1014…
#woodturning #epoxyresin #epoxy #siliconemold #epoxyart
3 سال پیش
در تاریخ 1400/11/22 منتشر شده
است.
7,027
بـار بازدید شده