How to Build RYOBI Tool Holders for a French Cleat Wall | 2019/27
28.9 هزار بار بازدید -
5 سال پیش
-
A few weeks back, I
A few weeks back, I built a French Cleat Wall System for my hand tools. In addition to the battery charging station, I made holders for most of my tools as well as a paper dispenser for painting. It's not the end of the project, but a good way there.
Each holder consists of a few basic parts: a back, a shelf if required, and a cleat. Each one is made of 3/4 ply with pocket holes, pin nails, and glue. Some holders have specialty 3D printed tool mounts that are specific to my Ryobi Tools. But if you have a different brand, the models are out there; see the links below.
Check out how I did it! Don't forget to comment, like, share, and subscribe!!!!
Ryobi Tool Holder:
https://www.thingiverse.com/thing:480...
Tools I use: https://www.dadityourselfdiy.com/2019...
Music Credits:
Cataclysmic Molten Core by Jingle Punks from YouTube Audio Library http://goo.gl/YmnOAx
Wild Pogo by Francis Preve is part of the YouTube Audio Library Wild Pogo - Francis Preve
The Chance by Audionautix is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/...)
Artist: http://audionautix.com/
Beach Party - Islandesque by Kevin MacLeod is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/...)
Source: http://incompetech.com/music/royalty-...
Artist: http://incompetech.com/
A New Beginning: www.bensound.com
Bright Wish by Kevin MacLeod is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/...)
Source: http://incompetech.com/music/royalty-...
Artist: http://incompetech.com/
#DadItYourselfDIY #FrenchCleat #Ryobi #BuildSomething
Each holder consists of a few basic parts: a back, a shelf if required, and a cleat. Each one is made of 3/4 ply with pocket holes, pin nails, and glue. Some holders have specialty 3D printed tool mounts that are specific to my Ryobi Tools. But if you have a different brand, the models are out there; see the links below.
Check out how I did it! Don't forget to comment, like, share, and subscribe!!!!
Ryobi Tool Holder:
https://www.thingiverse.com/thing:480...
Tools I use: https://www.dadityourselfdiy.com/2019...
Music Credits:
Cataclysmic Molten Core by Jingle Punks from YouTube Audio Library http://goo.gl/YmnOAx
Wild Pogo by Francis Preve is part of the YouTube Audio Library Wild Pogo - Francis Preve
The Chance by Audionautix is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/...)
Artist: http://audionautix.com/
Beach Party - Islandesque by Kevin MacLeod is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/...)
Source: http://incompetech.com/music/royalty-...
Artist: http://incompetech.com/
A New Beginning: www.bensound.com
Bright Wish by Kevin MacLeod is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/...)
Source: http://incompetech.com/music/royalty-...
Artist: http://incompetech.com/
#DadItYourselfDIY #FrenchCleat #Ryobi #BuildSomething
5 سال پیش
در تاریخ 1398/05/07 منتشر شده
است.
28,949
بـار بازدید شده