A Quick Fix Motor Mount for the CJ0618 Mini Lathe
117.6 هزار بار بازدید -
2 سال پیش
-
I recently bought a new
I recently bought a new Chinese CJ0618 7x12 Mini Lathe, very similar to the classic Sieg C2 lathe which is sold under different names all over the world. I have a few plans for this lathe, but the main reason for buying it was to finally answer all the questions I get asking whether the Proxxon PD 250/e is worth the money, or if a Chinese lathe is a better deal.
In this video I need to fix the twisted broken and completely inadequate studs which mounted the motor to the bed casting. To get the lathe back up and running I needed a quick fix while I think about a longer term project to make a better mount.
Tim Nummy's awesome lathe motor mounting brackets:
• It wasn't broken, just cheap - Fixing...
The links below will financially support this channel if you use them to buy stuff:
Machifit Cuniform Gib Quick Change Tool Post on Ali Express - bit.ly/3RR5hcA
Machines:
CJ0618 Benchtop Lathe (Sieg C2 copy) - ebay.us/VpMTGx
00:00 Introduction
00:13 The Problem
02:45 Designing a Quick Solution
03:24 Cutting Metal
04:08 Machining the Diameters
05:57 Cutting the Thread with a Die
08:47 Fitting to the Lathe
10:14 Adjusting the Belt Tension
11:27 Next Steps with this Lathe
Edited with:
DaVinci Resolv 18.0.1
Audacity 3.1.3
Music:
Easy Lemon by Kevin MacLeod is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0/)
Source: incompetech.com/music/royalty-free/index.html?isrc…
Artist: incompetech.com/
2 سال پیش
در تاریخ 1401/05/21 منتشر شده
است.
117,654
بـار بازدید شده