Spices Packing machine Manufacturers
30.1 هزار بار بازدید -
9 سال پیش
-
Collar type VFFS machineThe CTAPP
Collar type VFFS machine
The CTAPP Machine is vertical electro-pneumatic packaging machine. This machine automatically forms a pouch, fills it with a product and then seals and then separates the "filled and sealed Pouch". The CTAPP Machine is suitable for all kinds of free flow powder Products. This machine can be synchronized with Augur filling system and can pack up to 2 kg. Of products in centre sealed pouches. It uses a single roll of packing film The Machine is fitted with Collar Type Former Pipe unit that; convert flat packing film into vertically sealed tube; which is ultimately converted in to filled & sealed pouches. Horizontal Sealers act like opening & closing jaws to carry out horizontal sealing.
Ancillary & Optional Equipment
1. Pneumatic Gusseting Device
2. Filled Pouch Conveyer (Take off Conveyor)
3. D punching Unit
4. Hopper level sensor device (Minimum Material Level Sensor Device)
Technical specifications
Collar type pouch packing (CTAPP) machine, fitted with auger filler are used to pack Sticky, non flowing and fine powders like, Milk Powder, Maida, Gram Flour, Wheat Flour, Coffee Powder, Powdered Spices, Chili Powder, Turmeric Powder, Maize Flour, Pharmaceutical Powders etc.
Packing Film Any Heat Sealable Laminate
Product Application Non Free flow & Free Flow Powder products
Roll Width Depend to your requirements
Pouch Size Depend to products
Sealing Type Center Seal or 3Side sealing
Dozing System Servo base Auger filling system
Drive 1 HP AC Drive (Schneider Make)
Body Type SS Body or MS with Powder coating
Machine Covering Type Fully SS-304 or M.S with powder coated
Operating systems 7.5” HMI-PLC (Delta make)
Temperature Controller PID Type (Multispan or Select make)
Film draw mechanism Servo Base OR Clutch & brake motor
Volt Meter / AMP. Meter PID (Multispan or Select make)
Power Supply / Relay Omron make
Pneumatic components Janatics Make
Paper controller Attach Unbinding motor & sensor
Contact Parts Food Grande Stainless Steel SS 202/304 (According to requirements)
Electrical MCB & Switches ABB Make, Schneider Make & L&T Make
Compressed Air 6 CFM @ 6 Bar (Depending On Attachments )
Power Consumption 3.5 kW
Safety Feature Sensor Base Door Heater Indicator
Electrical Supply 220 V /AC / Single Phase / 50 HZ OR 440 V /AC Three Phase /50 Hz
Machine weight 900Kg. Approx
SAMPACK®
COCHIN-682035
PH:0484-2382211,4030212, MOB:+91 9447111444,
www.sampackindia.com, www.packingmachinekerala.com
The CTAPP Machine is vertical electro-pneumatic packaging machine. This machine automatically forms a pouch, fills it with a product and then seals and then separates the "filled and sealed Pouch". The CTAPP Machine is suitable for all kinds of free flow powder Products. This machine can be synchronized with Augur filling system and can pack up to 2 kg. Of products in centre sealed pouches. It uses a single roll of packing film The Machine is fitted with Collar Type Former Pipe unit that; convert flat packing film into vertically sealed tube; which is ultimately converted in to filled & sealed pouches. Horizontal Sealers act like opening & closing jaws to carry out horizontal sealing.
Ancillary & Optional Equipment
1. Pneumatic Gusseting Device
2. Filled Pouch Conveyer (Take off Conveyor)
3. D punching Unit
4. Hopper level sensor device (Minimum Material Level Sensor Device)
Technical specifications
Collar type pouch packing (CTAPP) machine, fitted with auger filler are used to pack Sticky, non flowing and fine powders like, Milk Powder, Maida, Gram Flour, Wheat Flour, Coffee Powder, Powdered Spices, Chili Powder, Turmeric Powder, Maize Flour, Pharmaceutical Powders etc.
Packing Film Any Heat Sealable Laminate
Product Application Non Free flow & Free Flow Powder products
Roll Width Depend to your requirements
Pouch Size Depend to products
Sealing Type Center Seal or 3Side sealing
Dozing System Servo base Auger filling system
Drive 1 HP AC Drive (Schneider Make)
Body Type SS Body or MS with Powder coating
Machine Covering Type Fully SS-304 or M.S with powder coated
Operating systems 7.5” HMI-PLC (Delta make)
Temperature Controller PID Type (Multispan or Select make)
Film draw mechanism Servo Base OR Clutch & brake motor
Volt Meter / AMP. Meter PID (Multispan or Select make)
Power Supply / Relay Omron make
Pneumatic components Janatics Make
Paper controller Attach Unbinding motor & sensor
Contact Parts Food Grande Stainless Steel SS 202/304 (According to requirements)
Electrical MCB & Switches ABB Make, Schneider Make & L&T Make
Compressed Air 6 CFM @ 6 Bar (Depending On Attachments )
Power Consumption 3.5 kW
Safety Feature Sensor Base Door Heater Indicator
Electrical Supply 220 V /AC / Single Phase / 50 HZ OR 440 V /AC Three Phase /50 Hz
Machine weight 900Kg. Approx
SAMPACK®
COCHIN-682035
PH:0484-2382211,4030212, MOB:+91 9447111444,
www.sampackindia.com, www.packingmachinekerala.com
9 سال پیش
در تاریخ 1394/08/14 منتشر شده
است.
30,154
بـار بازدید شده