Installing a Weatherproof safety RCD protected 13A 2 gang switched Outdoor Socket.
18.8 هزار بار بازدید -
2 سال پیش
-
In this video I show
In this video I show you the installation process of a weather proof RCD protected outdoor electrical lockable double socket using the easiest method (no more tripping over extension leads in and around the house)Connected via a 3 pin 13 amp fused plug.
using 1.5mm flexible 3 core cable.
It is important to ensure any socket installed outside is RCD protected as it could save your life in the event of an accident.
RCD TEST PROCEDURE (taken from operating instruction manual for this model)
Stage1; The RED indicator will normally show in the CLEAR window. If it does not, press RESET (orange) button and the RED indicator should appear.
Stage2; Press the TEST button.
The RED indicator will disappear from the CLEAR window.
DO NOT USE THIS SOCKET IF THE RED INDICATOR REMAINS AND SEEK THE ASSISTANCE OF A QUALIFIED ELECTRICIAN.
Stage3;Press the RESET button.
The RCD has now been set for safe use provided the RED indicator shows in the CLEAR window
Please subscribe my channel and like this video as its always appreciated. Thanks.
https://amzn.to/42xsmGr
The crimpers i use https://amzn.to/3JZvL9A
Disclaimer: The links above are amazon affiliate links. If you use these links to make a purchase, I may earn a small commission at no additional charge to you which helps support the channel
DISCLAIMER; This video is for guidance only and I accept no responsibility for any injuries, damages or loss for any work undertaken while following this video.
Consider your ability and if not confident then always consult a qualified electrician.
using 1.5mm flexible 3 core cable.
It is important to ensure any socket installed outside is RCD protected as it could save your life in the event of an accident.
RCD TEST PROCEDURE (taken from operating instruction manual for this model)
Stage1; The RED indicator will normally show in the CLEAR window. If it does not, press RESET (orange) button and the RED indicator should appear.
Stage2; Press the TEST button.
The RED indicator will disappear from the CLEAR window.
DO NOT USE THIS SOCKET IF THE RED INDICATOR REMAINS AND SEEK THE ASSISTANCE OF A QUALIFIED ELECTRICIAN.
Stage3;Press the RESET button.
The RCD has now been set for safe use provided the RED indicator shows in the CLEAR window
Please subscribe my channel and like this video as its always appreciated. Thanks.
https://amzn.to/42xsmGr
The crimpers i use https://amzn.to/3JZvL9A
Disclaimer: The links above are amazon affiliate links. If you use these links to make a purchase, I may earn a small commission at no additional charge to you which helps support the channel
DISCLAIMER; This video is for guidance only and I accept no responsibility for any injuries, damages or loss for any work undertaken while following this video.
Consider your ability and if not confident then always consult a qualified electrician.
2 سال پیش
در تاریخ 1401/05/26 منتشر شده
است.
18,851
بـار بازدید شده