DIY Step by Step Guide to Sand & Refinish Aluminum Oxide Hardwood Floors
375 بار بازدید -
12 ماه پیش
-
Welcome to our video demonstrating
Welcome to our video demonstrating WerkMaster's SandPaperLess System on engineered or factory finished hardwood floors. Whether you are a professional contractor or DIY enthusiast, learn how our SandPaperLess Technology conquers the challenges of removing aluminum oxide finishes, while delivering a perfectly flat, smooth floor. This video will take you through the Step by Step process using our Rasp wood floor sander. Compare today's current floor sanding technology to WerkMaster's patented Multi-Disc Technology.
Current floor finishing technology requires a:-
1. Drum Sander
2. Edger
3. Multi-drive or Square Buff Sander
4. Buffer
5. A High Skill Level
WerkMaster's SandPaperLess System technology requires a:
1. Rasp Floor Sander
2. Moderate Skill Level
Why only the Rasp? The Rasp is actually 4 Machines in 1:
1. Wood Floor Sander
2. Edger - Edges RIGHT To The WALL!
3. Multi-Drive 6 Heads
4. Buffer
This video provides a good understanding of the process for refinishing an engineered or factory finished hardwood floor in 3 Steps:
First Step – 50/60 Grit S-Segs
Next Step – 60 TurboBrade Pads
Final Step – 80 Grit TurboFinish Pads
The Rasp features our SandPaperLess Refinishing System that incorporates metal bond diamond abrasive tooling originally designed for removing thinset, mastics and coatings on concrete floors.
WerkMaster was the first company to incorporate this technology and over the years we were able to refine the system. It is impervious to the effects of aluminum oxide coatings. Our patented direct drive multi-head design and our Plug & Go Technology allows the Rasp to literally remove the aluminum oxide coating safely and easily without damaging the floor.
Aluminum oxide finish is extremely hard and quickly dulls regular sandpaper, but not our metal bond diamond abrasive tooling! It is designed to last over hundreds of jobs on refinishing aluminum oxide coated floors!
Want to take on the challenge of refinishing a engineered hardwood floor with a 1/8" wear layer? Please watch our video on this topic at: Video
If you enjoyed this video and found it helpful, please give us a thumbs up and share it with anyone else who might benefit from this fantastic technology.
Don't forget to subscribe to our channel and hit the notification bell, so you never miss any of our upcoming videos on home improvement, DIY projects, and other handy tips. Thanks for tuning in, and we'll see you in the next video. Happy refinishing!
To learn more about WerkMaster's Systems & Solutions for Refinishing Hardwood and Engineered Hardwood Floors, Wood Decks & Docks - visit www.WerkMaster.com/Rasp.
You can find more Rasp videos on our Wood Channel @werkmasterwoodfloorsanderedger
Don't forget to Subscribe to our Channel!
All WerkMaster Products Carry a 3 Year Parts & Labor Warranty
For more information on WerkMaster Products & Solutions
Visit www.werkmaster.com
Call Toll Free - 1-866-373-WERK Email [email protected]
WerkMaster Grinders & Sanders Inc
6932 Greenwood Street
Burnaby BC Canada
V5A 1X8
Current floor finishing technology requires a:-
1. Drum Sander
2. Edger
3. Multi-drive or Square Buff Sander
4. Buffer
5. A High Skill Level
WerkMaster's SandPaperLess System technology requires a:
1. Rasp Floor Sander
2. Moderate Skill Level
Why only the Rasp? The Rasp is actually 4 Machines in 1:
1. Wood Floor Sander
2. Edger - Edges RIGHT To The WALL!
3. Multi-Drive 6 Heads
4. Buffer
This video provides a good understanding of the process for refinishing an engineered or factory finished hardwood floor in 3 Steps:
First Step – 50/60 Grit S-Segs
Next Step – 60 TurboBrade Pads
Final Step – 80 Grit TurboFinish Pads
The Rasp features our SandPaperLess Refinishing System that incorporates metal bond diamond abrasive tooling originally designed for removing thinset, mastics and coatings on concrete floors.
WerkMaster was the first company to incorporate this technology and over the years we were able to refine the system. It is impervious to the effects of aluminum oxide coatings. Our patented direct drive multi-head design and our Plug & Go Technology allows the Rasp to literally remove the aluminum oxide coating safely and easily without damaging the floor.
Aluminum oxide finish is extremely hard and quickly dulls regular sandpaper, but not our metal bond diamond abrasive tooling! It is designed to last over hundreds of jobs on refinishing aluminum oxide coated floors!
Want to take on the challenge of refinishing a engineered hardwood floor with a 1/8" wear layer? Please watch our video on this topic at: Video
If you enjoyed this video and found it helpful, please give us a thumbs up and share it with anyone else who might benefit from this fantastic technology.
Don't forget to subscribe to our channel and hit the notification bell, so you never miss any of our upcoming videos on home improvement, DIY projects, and other handy tips. Thanks for tuning in, and we'll see you in the next video. Happy refinishing!
To learn more about WerkMaster's Systems & Solutions for Refinishing Hardwood and Engineered Hardwood Floors, Wood Decks & Docks - visit www.WerkMaster.com/Rasp.
You can find more Rasp videos on our Wood Channel @werkmasterwoodfloorsanderedger
Don't forget to Subscribe to our Channel!
All WerkMaster Products Carry a 3 Year Parts & Labor Warranty
For more information on WerkMaster Products & Solutions
Visit www.werkmaster.com
Call Toll Free - 1-866-373-WERK Email [email protected]
WerkMaster Grinders & Sanders Inc
6932 Greenwood Street
Burnaby BC Canada
V5A 1X8
12 ماه پیش
در تاریخ 1402/07/10 منتشر شده
است.
375
بـار بازدید شده