Saiga 12K 030 Shotgun - Step By Step Disassembly & Reassembly
741 بار بازدید -
4 سال پیش
-
The Saiga-12 (/ˈsaɪɡə/) is a
The Saiga-12 (/ˈsaɪɡə/) is a 12-gauge shotgun available in a wide range of configurations, patterned after the Kalashnikov series of rifles and named for the Saiga antelope. Like the Kalashnikov rifle variants, it is a rotating bolt, gas-operated gun that feeds from a box magazine. All Saiga-12 configurations are recognizable as Kalashnikov-pattern guns by the large lever-safety on the right side of the receiver, the optic mounting rail on the left side of the receiver and the large top-mounted dust cover held in place by the rear of the recoil spring assembly.
The Saiga-12 is manufactured by the arms division of Izhmash, in Russia. It was previously imported into the US by European American Armories, although their agreement expired in 2005 and Izhmash then began exporting through the Russian-American Armory Company. The current export import partner is Wolf Performance Arms. Izhmash also manufactures Saiga 20s and Saiga 410s in 20-gauge and .410 bore, as well as the Saiga semi-automatic hunting rifles in a number of centerfire calibers.
The Saiga-12 incorporates several features absent on the AK-47 and similar firearms.
Since shotgun shells are nearly twice as wide as 7.62×39mm cartridge, the extraction port in the side of the dust cover had to be increased in size. However, since the bolt had to remain the same length to fit inside the AK-47 sized receiver, the rear section of the bolt is covered by a sliding metal flap that rides on the recoil spring. This allows the gun to be sealed against dirt when the bolt is forward, but the compression of the recoil spring during firing moves the flap rearward to clear the extracted shells.
For the likely reason of simplifying production of Izhmash's other Kalashnikov-pattern guns, the Saiga-12 extractor does not rotate, but instead delegates the bolt-locking function to a caliber-neutral lug directly behind the bolt-face.
The Saiga-12 incorporates an adjustable two-position gas system, with "standard" and "magnum" settings for firing 2-3/4" and 3"-length shells respectively. This is because firing 3" shells with high power loads such as slugs and buckshot generates so much force that the receiver will be damaged if the full power of the gas system is employed without some sort of recoil buffer. The problem is that making the gun durable with such high power loads would make it more likely to experience a cycle failure with the less powerful 2-3/4" shells and likely not to cycle at all when used with low-powered less lethal ammunition. This would essentially render it a straight-pull mechanism.
Model Courtesy of World Of Guns: Gun Disassembly
The Saiga-12 is manufactured by the arms division of Izhmash, in Russia. It was previously imported into the US by European American Armories, although their agreement expired in 2005 and Izhmash then began exporting through the Russian-American Armory Company. The current export import partner is Wolf Performance Arms. Izhmash also manufactures Saiga 20s and Saiga 410s in 20-gauge and .410 bore, as well as the Saiga semi-automatic hunting rifles in a number of centerfire calibers.
The Saiga-12 incorporates several features absent on the AK-47 and similar firearms.
Since shotgun shells are nearly twice as wide as 7.62×39mm cartridge, the extraction port in the side of the dust cover had to be increased in size. However, since the bolt had to remain the same length to fit inside the AK-47 sized receiver, the rear section of the bolt is covered by a sliding metal flap that rides on the recoil spring. This allows the gun to be sealed against dirt when the bolt is forward, but the compression of the recoil spring during firing moves the flap rearward to clear the extracted shells.
For the likely reason of simplifying production of Izhmash's other Kalashnikov-pattern guns, the Saiga-12 extractor does not rotate, but instead delegates the bolt-locking function to a caliber-neutral lug directly behind the bolt-face.
The Saiga-12 incorporates an adjustable two-position gas system, with "standard" and "magnum" settings for firing 2-3/4" and 3"-length shells respectively. This is because firing 3" shells with high power loads such as slugs and buckshot generates so much force that the receiver will be damaged if the full power of the gas system is employed without some sort of recoil buffer. The problem is that making the gun durable with such high power loads would make it more likely to experience a cycle failure with the less powerful 2-3/4" shells and likely not to cycle at all when used with low-powered less lethal ammunition. This would essentially render it a straight-pull mechanism.
Model Courtesy of World Of Guns: Gun Disassembly
4 سال پیش
در تاریخ 1399/05/13 منتشر شده
است.
741
بـار بازدید شده