DIY Inexpensive Bow Mount Trolling Motor Stabilizer
30.4 هزار بار بازدید -
4 سال پیش
-
This is a DIY bow
This is a DIY bow mounted trolling motor stabilizer and support. This will keep the trolling motor shaft from flexing/bouncing/being damaged during rough conditions. The total cost of this project was less than $10.
Parts:
2 1/2 inch diameter pool noodle
PVC 1 inch to 3/4 inch reducing Tee fitting
PVC 3/4 inch pipe section
RAM 1 inch ball mount
Bungee cord
Parts:
2 1/2 inch diameter pool noodle
PVC 1 inch to 3/4 inch reducing Tee fitting
PVC 3/4 inch pipe section
RAM 1 inch ball mount
Bungee cord
4 سال پیش
در تاریخ 1399/03/30 منتشر شده
است.
30,459
بـار بازدید شده