The STRENGTH of 3D prints REMELTED in SALT
877.5 هزار بار بازدید -
4 سال پیش
-
Everyone is currently talking about
Everyone is currently talking about 3D prints remelted in salt, but how strong are they really? I printed parts in DasFilament PLA, ESUN PLA+, DasFilament PETG and ESUN ABS, and remelted them in salt. I've also been looking at different salt grain sizes and the temperatures that are necessary to properly re-melt the parts. Let's find out, if we can get 3D prints with the strength of injection molded parts!
Check out our CNC Kitchen products at https://cnckitchen.store/ or at resellers https://www.cnckitchen.com/reseller and on AMAZON (EU) https://geni.us/s8rYtQ
Website article: https://www.cnckitchen.com/blog/testi...
💚 Support me 💚
Patreon: Patreon: cnckitchen
Join as a YouTube member!
Original CNC Kitchen Threaded Inserts: https://geni.us/CNCKInsertsChoice
Merch: https://teespring.com/stores/cnckitchen
Buy an Original Prusa i3 printer: https://geni.us/CNCKPrusa
PayPal: https://www.paypal.me/CNCKitchen
Shop at Matterhackers(US): http://www.matterhackers.com/?aff=7479
Shop at 3DJake(EU): https://geni.us/zHvnB
🎙Check out my PODCAST with Tom Sanladerer
@themeltzone
🛒 Equipment used in this video (Affiliate Links):
Popcorn Salt: https://geni.us/KaXnPV
BBQ Thermometer: https://geni.us/doeDaL
GN 1/6-150 container: https://geni.us/FMj1E6
Original Prusa i3 Mk3S: https://geni.us/CNCKPrusaMk3
🎥 Related videos:
Annealing 3D prints in plaster: Triple (x3) your Layer Strength by An...
Remelting 3D prints - salt method: Remelting 3D printed thermoplastics (...
PC-Core ABS filament: PC-Core ABS - WARP-FREE annealing wit...
Fusing layers with superglue: STRONGER 3D Prints with GLUE? (and CA...
Fusing PLA layers by annealing: Strong 3D prints through ANNEALING, b...
🖨 Printed models:
3D Benchy: https://www.thingiverse.com/thing:763622
Customizable Lofty Container: https://www.thingiverse.com/thing:671884
⚙ My gear (Affiliate Links):
🎥 CAMERAS & LENSES
Panasonic GH5 - Professional 4k60 camera: https://geni.us/LMN0CmS
Panasonic GX80/GX85 - Great value system camera: https://geni.us/M2Sm
30mm f2.8 macro - Great Macro Lens (80% of my videos): https://geni.us/vEwqD
10-25mm f1.7 - Awesome Lens: https://geni.us/ZTBH
12-35mm f2.6 - Great Allround Lens: https://geni.us/S9GOsr
14-140mm f3.5-5.6 - My go-to travel Lens: https://geni.us/fSAyKo
25mm f1.4 - Nice prime for photography: https://geni.us/mqWM
🎙AUDIO
Rode Video Mic Pro - Shotgun mic: https://geni.us/6JFRdJ
Rode Film Maker Kit - Wireless mic: https://geni.us/XMD2N
Rode NT-USB - Studio Mic: https://geni.us/YVONvy
🔴 LIVE STREAMING
Elgatoo Stream Deck: https://geni.us/ppIiAL
Elgatoo HDMI USB Capture Card: https://geni.us/imhD
Logitech C920 - Overhead camera: https://geni.us/ViVgB
Follow me on Twitter: Twitter: cnc_kitchen
Follow me on Instagram: Instagram: cnckitchenyt
Chapters:
00:00 Introduction
02:40 Which salt?
04:55 Putting parts in salt
06:53 Heat treatment
10:07 Dimensional change
10:48 Strength test
17:14 Promotion
18:29 Outro
#3Dprinting #remeltingInSalt #science
DISCLAIMER: This video was sponsored by Audible.
Check out our CNC Kitchen products at https://cnckitchen.store/ or at resellers https://www.cnckitchen.com/reseller and on AMAZON (EU) https://geni.us/s8rYtQ
Website article: https://www.cnckitchen.com/blog/testi...
💚 Support me 💚
Patreon: Patreon: cnckitchen
Join as a YouTube member!
Original CNC Kitchen Threaded Inserts: https://geni.us/CNCKInsertsChoice
Merch: https://teespring.com/stores/cnckitchen
Buy an Original Prusa i3 printer: https://geni.us/CNCKPrusa
PayPal: https://www.paypal.me/CNCKitchen
Shop at Matterhackers(US): http://www.matterhackers.com/?aff=7479
Shop at 3DJake(EU): https://geni.us/zHvnB
🎙Check out my PODCAST with Tom Sanladerer
@themeltzone
🛒 Equipment used in this video (Affiliate Links):
Popcorn Salt: https://geni.us/KaXnPV
BBQ Thermometer: https://geni.us/doeDaL
GN 1/6-150 container: https://geni.us/FMj1E6
Original Prusa i3 Mk3S: https://geni.us/CNCKPrusaMk3
🎥 Related videos:
Annealing 3D prints in plaster: Triple (x3) your Layer Strength by An...
Remelting 3D prints - salt method: Remelting 3D printed thermoplastics (...
PC-Core ABS filament: PC-Core ABS - WARP-FREE annealing wit...
Fusing layers with superglue: STRONGER 3D Prints with GLUE? (and CA...
Fusing PLA layers by annealing: Strong 3D prints through ANNEALING, b...
🖨 Printed models:
3D Benchy: https://www.thingiverse.com/thing:763622
Customizable Lofty Container: https://www.thingiverse.com/thing:671884
⚙ My gear (Affiliate Links):
🎥 CAMERAS & LENSES
Panasonic GH5 - Professional 4k60 camera: https://geni.us/LMN0CmS
Panasonic GX80/GX85 - Great value system camera: https://geni.us/M2Sm
30mm f2.8 macro - Great Macro Lens (80% of my videos): https://geni.us/vEwqD
10-25mm f1.7 - Awesome Lens: https://geni.us/ZTBH
12-35mm f2.6 - Great Allround Lens: https://geni.us/S9GOsr
14-140mm f3.5-5.6 - My go-to travel Lens: https://geni.us/fSAyKo
25mm f1.4 - Nice prime for photography: https://geni.us/mqWM
🎙AUDIO
Rode Video Mic Pro - Shotgun mic: https://geni.us/6JFRdJ
Rode Film Maker Kit - Wireless mic: https://geni.us/XMD2N
Rode NT-USB - Studio Mic: https://geni.us/YVONvy
🔴 LIVE STREAMING
Elgatoo Stream Deck: https://geni.us/ppIiAL
Elgatoo HDMI USB Capture Card: https://geni.us/imhD
Logitech C920 - Overhead camera: https://geni.us/ViVgB
Follow me on Twitter: Twitter: cnc_kitchen
Follow me on Instagram: Instagram: cnckitchenyt
Chapters:
00:00 Introduction
02:40 Which salt?
04:55 Putting parts in salt
06:53 Heat treatment
10:07 Dimensional change
10:48 Strength test
17:14 Promotion
18:29 Outro
#3Dprinting #remeltingInSalt #science
DISCLAIMER: This video was sponsored by Audible.
4 سال پیش
در تاریخ 1399/08/03 منتشر شده
است.
877,550
بـار بازدید شده