Upgrade Your Import Boring Head

Re-upload after accidentally deleting this video.  :-(

NOTE: The set screws mentioned in the video are incorrect.  These are the actual set screws I used, verified in the shop, with a thread gage.

Nonmarring Flat Point Set Screw, 18-8 Stainless Steel, M8 Size, 10mm Length, 1.25mm Pitch
McMaster-Carr #92605A141
http://www.mcmaster.com/mv1467920594/...

Nonmarring Flat Point Socket Set Screw, Alloy Steel, M10 Size, 12mm Length, 1.5mm Pitch
McMaster-Carr #93245A156
http://www.mcmaster.com/mv1467920594/...

4mm hex key (McMaster-Carr #71285A175):
http://www.mcmaster.com/mv1467920594/...

5mm hex key (McMaster-Carr #71285A177):
http://www.mcmaster.com/mv1467920594/...

6mm hex key (McMaster-Carr #7289A17):
http://www.mcmaster.com/mv1467920594/...


Suburban Tools video showing how to use a boring head:
How to use a boring  bar on a Bridgep...


Suburban Tools video demonstrating a large fly cutter:
Fly Cutting a Mirror Finish Time to S...


l0ckcr4ck3r video rant on cheap import boring heads:
A Boring Rant

Mesa Tool (high quality carbide insert boring bar):  http://www.mesatool.com