On-Site with Matt Wiring a Spurred Socket form a Ring Final Circuit (How to Spur Socket from a Ring)
175.7 هزار بار بازدید -
6 سال پیش
-
Matt is on site wiring
Matt is on site wiring a spur from a ring final circuit. Matt is using PVC mini trunking and 2.5 mm2 cable to wire a spur socket from an A1 ring final circuit. Matt also shows on screen the live tests required for this job on a minor works.
Please note the original footage was over 2 hours and I have edited it down to about 20 mins. Matt proved the socket was on the ring as well as tracing out the redundant spur already connected to the original socket. This redundant spur was removed when the new spurred socket was added.
How to spur a socket outlet from a ring final circuit
How to carryout an fault loop impedance test
How to carryout a 30 mA RCD test at half time, 1 times and 5 times
== 🕐 Time Stamps - Cut to the action 🕕 ==
00:00 - Wiring a spur from a socket outlet
01:36 - Important to carryout the safe isolation
01:59 - Spur from this socket
03:31 - Earth fault loop impedance test (Zs)
04:21 - Safe isolation
05:27 - Drilling through the wall
06:03 - Adding a grommet
07:29 - Mini trunking
11:31 - Adding the new double socket
12:31 - Socket connection
13:50 - Connecting into the ring circuit
14:39 - 3.5 mm tap
16:25 - Earth fault loop impedance test (Zs)
18:05 - RCD testing
Videos are training aids for City and Guilds (C and G) and EAL courses Level 1, 2, 3 plus AM2, AM2S and AM2E.
You can follow me day by day on Facebook, Instagram and Twitter lookout for "GSH Electrical.
▶️ FACEBOOK Facebook: gshelectrical
▶️ INSTAGRAM Instagram: BrIhZmrAYGDTmjMdb9lUNQodMevqsbDDki3qpQ0
▶️ TWITTER Twitter: gsh_electrical
#GSHElectrical #Electricaltrainingvideos
Please note the original footage was over 2 hours and I have edited it down to about 20 mins. Matt proved the socket was on the ring as well as tracing out the redundant spur already connected to the original socket. This redundant spur was removed when the new spurred socket was added.
How to spur a socket outlet from a ring final circuit
How to carryout an fault loop impedance test
How to carryout a 30 mA RCD test at half time, 1 times and 5 times
== 🕐 Time Stamps - Cut to the action 🕕 ==
00:00 - Wiring a spur from a socket outlet
01:36 - Important to carryout the safe isolation
01:59 - Spur from this socket
03:31 - Earth fault loop impedance test (Zs)
04:21 - Safe isolation
05:27 - Drilling through the wall
06:03 - Adding a grommet
07:29 - Mini trunking
11:31 - Adding the new double socket
12:31 - Socket connection
13:50 - Connecting into the ring circuit
14:39 - 3.5 mm tap
16:25 - Earth fault loop impedance test (Zs)
18:05 - RCD testing
Videos are training aids for City and Guilds (C and G) and EAL courses Level 1, 2, 3 plus AM2, AM2S and AM2E.
You can follow me day by day on Facebook, Instagram and Twitter lookout for "GSH Electrical.
▶️ FACEBOOK Facebook: gshelectrical
▶️ INSTAGRAM Instagram: BrIhZmrAYGDTmjMdb9lUNQodMevqsbDDki3qpQ0
▶️ TWITTER Twitter: gsh_electrical
#GSHElectrical #Electricaltrainingvideos
6 سال پیش
در تاریخ 1397/04/17 منتشر شده
است.
175,715
بـار بازدید شده