How to Update a Flat Panel Hollow Core Door | Ask This Old House
171 هزار بار بازدید -
5 سال پیش
-
Ask This Old House carpenter
Ask This Old House carpenter Nathan Gilbert upgrades a standard, flat panel hollow core door to look more modern.
#ThisOldHouse #AskTOH
SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse
Time: 4-5 hours
Cost: $50-100
Skill Level: Beginner to Moderate
Tools List for Updating a Flat Panel Door: [YT]
Screwdriver [https://amzn.to/2FjzH2Y] or drill [https://amzn.to/39xAWcR]
Tape measure [https://amzn.to/2Fj7E3y]
Miter saw [https://amzn.to/2tviFfn]
Brad nailer [https://amzn.to/39xFLmt]
Caulking gun [https://amzn.to/2QHfHwy]
Paint brush [https://amzn.to/2MTZSkT]
Paint bucket [https://amzn.to/39EgTJs]
Shopping List: [YT]
Decorative trim [https://amzn.to/39EQqLV]
New door hardware [https://amzn.to/2SWgY5H]
Wood glue [https://amzn.to/39AZYaW]
Brad nails [https://amzn.to/37EisFP]
Wood putty [https://amzn.to/2QkVz45]
Caulk [https://amzn.to/37BRgHM]
Paint [https://amzn.to/2MRusf6]
Steps:
1. Start by taking the door off of the hinges.
2. Remove all the hardware from the door using a screwdriver or a drill.
3. Mark the layout for the door. In general, Nathan likes to start with a 4” rail on the top, center the middle rail around the doorknob, and leave any excess on the bottom.
4. Cut all the trim to size and miter the edges.
5. Apply wood glue to the cut the trim and also along the edges of the layout on the door. Glue the trim to the door and secure it in place with the brad nails.
6. Fill in all the nail holes with wood putty and caulk around the edges of the trim.
7. Paint the door to the desired sheen and color.
8. Install the new hardware to the door and hang it back up.
Resources:
Updating a hollow core door can save some time trying to hang a completely new door and can save some money compared to buying a new door as well.
To add the fake panels, Nathan used some molding, which can be found at any home center. He secured those to the door using Gorilla wood glue [https://amzn.to/2tpz4SI] and a 20V Max Cordless Bradnailer, which is manufactured by Dewalt [https://amzn.to/2rWNcmc]. Nathan then painted the door using Behr Marquee in Ultra Pure White [https://amzn.to/39BPIz0]. He also replaced the old brass hardware with a bedroom/bathroom door knob, which is manufactured by Kwikset [https://amzn.to/2QG6Zys].
About Ask This Old House TV:
Homeowners have a virtual truckload of questions for us on smaller projects, and we're ready to answer. Ask This Old House solves the steady stream of home improvement problems faced by our viewers—and we make house calls! Ask This Old House features some familiar faces from This Old House, including Kevin O'Connor, general contractor Tom Silva, plumbing and heating expert Richard Trethewey, and landscape contractor Roger Cook.
Follow This Old House and Ask This Old House:
Facebook: http://bit.ly/ThisOldHouseFB
Twitter: http://bit.ly/ThisOldHouseTwitter
http://bit.ly/AskTOHTwitter
Pinterest: http://bit.ly/ThisOldHousePinterest
Instagram: http://bit.ly/ThisOldHouseIG
Tumblr: http://bit.ly/ThisOldHouseTumblr
Keywords:
This Old House, Ask This Old House, DIY, Home Improvement, DIY Ideas, Renovation, Renovation Ideas, How To Fix, How To Install, How To Build, Nathan Gilbert, Kevin O'Connor, woodworking, interior door, upgrade, flat panel hollow core door
Watch the full episode:
https://www.thisoldhouse.com/watch/ca...
How to Update a Flat Panel Hollow Core Door | Ask This Old House
thisoldhouse
#ThisOldHouse #AskTOH
SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse
Time: 4-5 hours
Cost: $50-100
Skill Level: Beginner to Moderate
Tools List for Updating a Flat Panel Door: [YT]
Screwdriver [https://amzn.to/2FjzH2Y] or drill [https://amzn.to/39xAWcR]
Tape measure [https://amzn.to/2Fj7E3y]
Miter saw [https://amzn.to/2tviFfn]
Brad nailer [https://amzn.to/39xFLmt]
Caulking gun [https://amzn.to/2QHfHwy]
Paint brush [https://amzn.to/2MTZSkT]
Paint bucket [https://amzn.to/39EgTJs]
Shopping List: [YT]
Decorative trim [https://amzn.to/39EQqLV]
New door hardware [https://amzn.to/2SWgY5H]
Wood glue [https://amzn.to/39AZYaW]
Brad nails [https://amzn.to/37EisFP]
Wood putty [https://amzn.to/2QkVz45]
Caulk [https://amzn.to/37BRgHM]
Paint [https://amzn.to/2MRusf6]
Steps:
1. Start by taking the door off of the hinges.
2. Remove all the hardware from the door using a screwdriver or a drill.
3. Mark the layout for the door. In general, Nathan likes to start with a 4” rail on the top, center the middle rail around the doorknob, and leave any excess on the bottom.
4. Cut all the trim to size and miter the edges.
5. Apply wood glue to the cut the trim and also along the edges of the layout on the door. Glue the trim to the door and secure it in place with the brad nails.
6. Fill in all the nail holes with wood putty and caulk around the edges of the trim.
7. Paint the door to the desired sheen and color.
8. Install the new hardware to the door and hang it back up.
Resources:
Updating a hollow core door can save some time trying to hang a completely new door and can save some money compared to buying a new door as well.
To add the fake panels, Nathan used some molding, which can be found at any home center. He secured those to the door using Gorilla wood glue [https://amzn.to/2tpz4SI] and a 20V Max Cordless Bradnailer, which is manufactured by Dewalt [https://amzn.to/2rWNcmc]. Nathan then painted the door using Behr Marquee in Ultra Pure White [https://amzn.to/39BPIz0]. He also replaced the old brass hardware with a bedroom/bathroom door knob, which is manufactured by Kwikset [https://amzn.to/2QG6Zys].
About Ask This Old House TV:
Homeowners have a virtual truckload of questions for us on smaller projects, and we're ready to answer. Ask This Old House solves the steady stream of home improvement problems faced by our viewers—and we make house calls! Ask This Old House features some familiar faces from This Old House, including Kevin O'Connor, general contractor Tom Silva, plumbing and heating expert Richard Trethewey, and landscape contractor Roger Cook.
Follow This Old House and Ask This Old House:
Facebook: http://bit.ly/ThisOldHouseFB
Twitter: http://bit.ly/ThisOldHouseTwitter
http://bit.ly/AskTOHTwitter
Pinterest: http://bit.ly/ThisOldHousePinterest
Instagram: http://bit.ly/ThisOldHouseIG
Tumblr: http://bit.ly/ThisOldHouseTumblr
Keywords:
This Old House, Ask This Old House, DIY, Home Improvement, DIY Ideas, Renovation, Renovation Ideas, How To Fix, How To Install, How To Build, Nathan Gilbert, Kevin O'Connor, woodworking, interior door, upgrade, flat panel hollow core door
Watch the full episode:
https://www.thisoldhouse.com/watch/ca...
How to Update a Flat Panel Hollow Core Door | Ask This Old House
thisoldhouse
5 سال پیش
در تاریخ 1398/10/16 منتشر شده
است.
171,063
بـار بازدید شده