How I electrified our towel rails
8.4 هزار بار بازدید -
12 ماه پیش
-
We disconnected our gas supply
We disconnected our gas supply earlier in the year, and replaced our central heating with an air-to-air heat pump system. But that meant we no longer had a way to heat our towel rails, so in this video I show what I did to rectify that problem.
Link to the towel rail immersion inserts that I bought:
www.amazon.co.uk/Valdern-ELECTRIC-HEATING-BATHROOM…
All the other stuff can be found in any good hardware store.
Total cost for upgrading these three towel rails was about £200 but that includes the extra tools and drill bits I bought that I can use for other projects.
Our system summary:
6.8 kWp solar array split E/W
5 kW Gen 2 GivEnergy hybrid inverter
14.7 kWh GivEnergy batteries
A2A heat pump heating system
Fiat 500e EV
00:00 Introduction
01:01 Part 1: basic setup
07:52 Part 2: DIY details
20:49 Closing remarks
Please note that Tim is not a professional consultant, just an enthusiastic amateur, so cannot reply to requests for advice or opinions on specific systems or green investment opportunities. Thank you for your understanding.
Support the channel and get £50 of credit by switching to Octopus Energy using my referral code:
share.octopus.energy/cute-quail-190
Or buy us a coffee:
www.buymeacoffee.com/timandkat
12 ماه پیش
در تاریخ 1402/06/29 منتشر شده
است.
8,415
بـار بازدید شده