How to Replace Variable Valve Timing Solenoid 2012-2020 Ford Focus
73.5 هزار بار بازدید -
2 سال پیش
-
Buy Now!New Variable Valve Timing
Buy Now!
New Variable Valve Timing Solenoid from 1AAuto.com http://1aau.to/ia/1AZMX00425
If the variable valve timing solenoid in your vehicle is stuck or clogged, causing your engine to not run properly, you may notice reduced fuel efficiency, sputtering, rough running or stalling in your engine. Solenoids usually need to be replaced once they begin to fail. This video shows you how to install a new variable valve timing solenoid in your 2012-2020 Ford Focus.
This process should be similar on the following vehicles:
2012 Ford Focus
2013 Ford Focus
2014 Ford Focus
2015 Ford Focus
2016 Ford Focus
2017 Ford Focus
2018 Ford Focus
Tools you will need:
• Pocket Screwdriver
• Pry Bar http://1aau.to/oa/1AXAA00020
• 8mm Socket http://1aau.to/oa/1AXAA00017
• Trim Tool Set http://1aau.to/oa/1AXXX00004
• Vacuum
• Ratchet http://1aau.to/oa/1AXAA00016
• Swivel
• Cloth Rags http://1aau.to/oa/1AXSS00035
• Rubber Mallet http://1aau.to/oa/1AXAA00413
Subscribe: @trq
Check out our playlist:
Ford Focus 2012-2020 3rd Generation: Ford Focus 2012-2020 3rd Generation
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
New Variable Valve Timing Solenoid from 1AAuto.com http://1aau.to/ia/1AZMX00425
If the variable valve timing solenoid in your vehicle is stuck or clogged, causing your engine to not run properly, you may notice reduced fuel efficiency, sputtering, rough running or stalling in your engine. Solenoids usually need to be replaced once they begin to fail. This video shows you how to install a new variable valve timing solenoid in your 2012-2020 Ford Focus.
This process should be similar on the following vehicles:
2012 Ford Focus
2013 Ford Focus
2014 Ford Focus
2015 Ford Focus
2016 Ford Focus
2017 Ford Focus
2018 Ford Focus
Tools you will need:
• Pocket Screwdriver
• Pry Bar http://1aau.to/oa/1AXAA00020
• 8mm Socket http://1aau.to/oa/1AXAA00017
• Trim Tool Set http://1aau.to/oa/1AXXX00004
• Vacuum
• Ratchet http://1aau.to/oa/1AXAA00016
• Swivel
• Cloth Rags http://1aau.to/oa/1AXSS00035
• Rubber Mallet http://1aau.to/oa/1AXAA00413
Subscribe: @trq
Check out our playlist:
Ford Focus 2012-2020 3rd Generation: Ford Focus 2012-2020 3rd Generation
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
2 سال پیش
در تاریخ 1401/02/13 منتشر شده
است.
73,580
بـار بازدید شده