Creality Ender 3 - V2 - Dual Gear Is a Great Upgrade, Except for This One Issue... Let's Fix it!
166.1 هزار بار بازدید -
4 سال پیش
-
I knew what I was
I knew what I was getting into on this one, so I was ready! A video from CHEP showed some testing he performed and the dual gear was giving more accurate and repeatable results every time on extrusions. In CHEP's video he showed the aluminum below the gear wearing away and his solution was to add oil, which helped but it didn't prevent the problem. So thank to to the CHEP channel for the inspiration for this video.
If you'd like to become a patron to help this channel grow and get involved with future video ideas, here is the link: Patreon: Needitmakeit
CHEP's Video - Dual Drive Gear Extruder Upgrade + E ...
I have tested this myself over several weeks and this dual gear really does have excellent grip on the filament without changing the shape. As an example, when putting a spool back to switch colors, I accidentally fed the end under the next line and didn't notice. Rather than the gears slipping, the printer pulled itself to the fixed spool holder inside my enclosure until finally it could not move anymore. After that experience I became pretty confident that dual-gear was the way to go.
In this video we identify the problem and we'll correct the problem with the most basic tools I can find so that this fix can be made by just about anyone. Yes I have a metal lathe and no I did not use it because not everyone has a lathe.
AMAZON USA:
Dual Extruder - https://amzn.to/3X7IRq8
My Printer - https://amzn.to/3P7YT1j
Capricorn XS PTFE - https://amzn.to/43ReSoK
Raspberry Pi 4 Computer 2gb - https://amzn.to/3N1bocn
Pi Camera V2 - https://amzn.to/3MYHIgd
Long Cable - https://amzn.to/3CuUJch
Power Cable - https://amzn.to/42zita6
Raspberry Pi 4B ABS Case W/Fan and Heatsinks - https://amzn.to/3oZzqfX
AMAZON CANADA:
Dual Extruder - https://amzn.to/36PXeXg
My printer - https://amzn.to/3sWfKpO
Capricorn XS PTFE - https://amzn.to/3jnwbYw
Raspberry Pi 4 Computer 2gb - https://amzn.to/37IN6kD
Pi Camera V2 - https://amzn.to/2HA6LZe
Long Cable - https://amzn.to/2HzdQJq
Power Cable - https://amzn.to/3jzEjDI
Raspberry Pi 4B ABS Case W/ Fan and Heatsinks - https://amzn.to/3mpJCrm
#ender3
#3dprinting
#Problemsolving
If you'd like to become a patron to help this channel grow and get involved with future video ideas, here is the link: Patreon: Needitmakeit
CHEP's Video - Dual Drive Gear Extruder Upgrade + E ...
I have tested this myself over several weeks and this dual gear really does have excellent grip on the filament without changing the shape. As an example, when putting a spool back to switch colors, I accidentally fed the end under the next line and didn't notice. Rather than the gears slipping, the printer pulled itself to the fixed spool holder inside my enclosure until finally it could not move anymore. After that experience I became pretty confident that dual-gear was the way to go.
In this video we identify the problem and we'll correct the problem with the most basic tools I can find so that this fix can be made by just about anyone. Yes I have a metal lathe and no I did not use it because not everyone has a lathe.
AMAZON USA:
Dual Extruder - https://amzn.to/3X7IRq8
My Printer - https://amzn.to/3P7YT1j
Capricorn XS PTFE - https://amzn.to/43ReSoK
Raspberry Pi 4 Computer 2gb - https://amzn.to/3N1bocn
Pi Camera V2 - https://amzn.to/3MYHIgd
Long Cable - https://amzn.to/3CuUJch
Power Cable - https://amzn.to/42zita6
Raspberry Pi 4B ABS Case W/Fan and Heatsinks - https://amzn.to/3oZzqfX
AMAZON CANADA:
Dual Extruder - https://amzn.to/36PXeXg
My printer - https://amzn.to/3sWfKpO
Capricorn XS PTFE - https://amzn.to/3jnwbYw
Raspberry Pi 4 Computer 2gb - https://amzn.to/37IN6kD
Pi Camera V2 - https://amzn.to/2HA6LZe
Long Cable - https://amzn.to/2HzdQJq
Power Cable - https://amzn.to/3jzEjDI
Raspberry Pi 4B ABS Case W/ Fan and Heatsinks - https://amzn.to/3mpJCrm
#ender3
#3dprinting
#Problemsolving
4 سال پیش
در تاریخ 1399/11/18 منتشر شده
است.
166,100
بـار بازدید شده