VEVOR 🆚 DEVIL FORGE : WHICH IS BETTER⁉️ #belgium #copper #melting #metalcasting #vevor #devilforge
11.4 هزار بار بازدید -
11 ماه پیش
-
Hello everyone, @SJWCasting here!👋🏻
Hello everyone, @SJWCasting here!👋🏻
#metals #copper #devilforge #metalcasting #melting #casting #bigingots #scrapping #brass #aluminum #nordicgold #vevor #scrap
This week I put the two furnaces I have to the test!! Vevor vs. Devil Forge.
The results surprised me a little bit.
I known that the Devil Forge would be faster, but I didn’t thought the Vevor furnace would be so close to the Devil Forge.
Devil Forge: under 18min
Vevor Furnace: just over 18 min
The Vevor Furnace was cheaper to run, it didn’t need so much gas as the Devil Forge.
Become a member to gain acces to these perks:
@sjwcasting
⚠️So if you want to start melting metals, and want a cheap furnace to begin, take a look at the link.
And don’t forget to use the code for 5% off!!!
VEVOR 6kg Propane Melting Furnace: https://s.vevor.com/bfQkdx
Coupon code: VVPRO to save 5% off
⚠️ -Also, I’m now an affiliate with artbyadrock, so if you are looking for some graphite coin molds, check out this link:
https://artbyadrock.com/?wpam_id=16 . When you use that link and buy something, I’ll get a small percentage.
So check it out!!
⚠️ -If you wonder where I get my crucibles, check out Etsy : https://www.etsy.com/nl/shop/alfindin...
⚠️ MERCH: SJWCasting.com
WHY I STARTED SELLING MERCH?
Easy⬇️
By selling merch, I can earn a little bit money (not that much..) and put more in the channel.
Also, I can save more of my own money so we can move to a bigger place.
With a bigger workplace because it’s getting claustrophobic in the garage,
with other projects I’m starting soon, I’ll need more space, much more space!!!
Everything you see is created by yours truly 😁. I spend much time on this. Ordered a bunch of stuff to test and adjust. Now it’s all ready!! I will release more merch in the summer, limited edition!! And more after, but I need some inspiration first😉.
‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️
Thank you al for watching! Please like the videos and subscribe to my channel. It helps out a lot!! I know you are busy, but with one click, you can make me a happy melter. And it doesn’t cost you anything!🔥😁
‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️
🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴If you want to know what gear I’m using, here’s a list😉:🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴
Cameras📷:
-iphone 12 Pro Max: all-round filming
-iphone 12 mini: shorts mostly
-Gopro hero 10 black: extra camera, close to furnace action
-Sony ZV-E 10: all-around filming, this is the main camera now so I still figuring out stuff
-rode videomic go 2 (should get better audio)
-ND filter: 2 ND-400 ND
3D-printer🖨:
-Creality 3D ender-3 v2
Furnace🔥:
-devil forge 10KG model
Editing software💽:
-lumafusion (only iOS ) for editing
-iMovie (only iOS ) for adding text
Laptop for editing/ 3D printing/3D modeling💻:
-2020 MacBook Air M1 16GB RAM (does the job pretty well!)
🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴
!!! Thank you all for the support !!!
********* I hope you liked the video! *********
You can check me out on:
-Instagram sjw_casting
-Facebook SJ WCasting
-TikTok SJW_casting
*************************************************
**** I post a new video every
Friday around midnight (GMT+1) ****
_____________________________________________
As always, I hope you have
a great weekend!!
See you next time !!!
#metals #copper #devilforge #metalcasting #melting #casting #bigingots #scrapping #brass #aluminum #nordicgold #vevor #scrap
This week I put the two furnaces I have to the test!! Vevor vs. Devil Forge.
The results surprised me a little bit.
I known that the Devil Forge would be faster, but I didn’t thought the Vevor furnace would be so close to the Devil Forge.
Devil Forge: under 18min
Vevor Furnace: just over 18 min
The Vevor Furnace was cheaper to run, it didn’t need so much gas as the Devil Forge.
Become a member to gain acces to these perks:
@sjwcasting
⚠️So if you want to start melting metals, and want a cheap furnace to begin, take a look at the link.
And don’t forget to use the code for 5% off!!!
VEVOR 6kg Propane Melting Furnace: https://s.vevor.com/bfQkdx
Coupon code: VVPRO to save 5% off
⚠️ -Also, I’m now an affiliate with artbyadrock, so if you are looking for some graphite coin molds, check out this link:
https://artbyadrock.com/?wpam_id=16 . When you use that link and buy something, I’ll get a small percentage.
So check it out!!
⚠️ -If you wonder where I get my crucibles, check out Etsy : https://www.etsy.com/nl/shop/alfindin...
⚠️ MERCH: SJWCasting.com
WHY I STARTED SELLING MERCH?
Easy⬇️
By selling merch, I can earn a little bit money (not that much..) and put more in the channel.
Also, I can save more of my own money so we can move to a bigger place.
With a bigger workplace because it’s getting claustrophobic in the garage,
with other projects I’m starting soon, I’ll need more space, much more space!!!
Everything you see is created by yours truly 😁. I spend much time on this. Ordered a bunch of stuff to test and adjust. Now it’s all ready!! I will release more merch in the summer, limited edition!! And more after, but I need some inspiration first😉.
‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️
Thank you al for watching! Please like the videos and subscribe to my channel. It helps out a lot!! I know you are busy, but with one click, you can make me a happy melter. And it doesn’t cost you anything!🔥😁
‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️
🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴If you want to know what gear I’m using, here’s a list😉:🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴
Cameras📷:
-iphone 12 Pro Max: all-round filming
-iphone 12 mini: shorts mostly
-Gopro hero 10 black: extra camera, close to furnace action
-Sony ZV-E 10: all-around filming, this is the main camera now so I still figuring out stuff
-rode videomic go 2 (should get better audio)
-ND filter: 2 ND-400 ND
3D-printer🖨:
-Creality 3D ender-3 v2
Furnace🔥:
-devil forge 10KG model
Editing software💽:
-lumafusion (only iOS ) for editing
-iMovie (only iOS ) for adding text
Laptop for editing/ 3D printing/3D modeling💻:
-2020 MacBook Air M1 16GB RAM (does the job pretty well!)
🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴⚪️🔴
!!! Thank you all for the support !!!
********* I hope you liked the video! *********
You can check me out on:
-Instagram sjw_casting
-Facebook SJ WCasting
-TikTok SJW_casting
*************************************************
**** I post a new video every
Friday around midnight (GMT+1) ****
_____________________________________________
As always, I hope you have
a great weekend!!
See you next time !!!
11 ماه پیش
در تاریخ 1402/05/12 منتشر شده
است.
11,482
بـار بازدید شده