2007-2014 GMC Yukon Headlight Replacement & Bulb Removal How-To Change Headlight Bulb Assembly XL
321.3 هزار بار بازدید -
6 سال پیش
-
https://amzn.to/2RHauXv GMC Yukon Headlight Replacement! GMC Yukon Headlight Bulb Removal! 2007 2008 2009 2010 2011 2012 2013 & 2014. How-To Change Headlight Bulb Assembly on a 2007-2014 GMC Yukon! SLE, SLT and Denali XL. EASY Step by Step GMC Yukon Headlight & Bulb Replacement! I will show you how to remove the entire headlight assembly and headlight bulb. You’ll have access to the turn signal and daytime running lights as well. Easy step by step installation and removal tips. Instructions also apply to other cars!
►Support the Channel & Purchase WorkingWithWimberley Mug!◄
www.workingwithwimberley.com
As an Amazon Associate I earn from qualifying purchases
Headlight Assembly: https://amzn.to/2RHauXv
Tail Light Assembly: https://amzn.to/3VwypZe
Grill (Upper): https://amzn.to/3ngUU1z
Grill (Lower): https://amzn.to/3n2NC1c
Craftsman Socket Set: https://amzn.to/37fwBZW
Drill Combo Set: https://amzn.to/2E6JeJU
GoPro Hero 7 Black (What I Use to Record): https://amzn.to/2NCDCwf
► Subscribe: https://www.youtube.com/WorkingWithWi...
► Website: http://www.workingwithwimberley.com
► Instagram: Instagram: workingwithwimberley
► Facebook: Facebook: WorkingWithWimberley
► Twitter: Twitter: wkwithwimberley
► YouTube: workingwithwimberley
STEPS:
1. Use a 7mm socket to remove two bolts from the grill
2. Use a 10mm socket to remove six bolts from the grill
3. Use a 10mm socket to remove two bolts from the top of the headlight assembly
4. Turn the tire to the side to access the inner fender liner
5. Use a 7mm socket to remove two bolts from the fender liner
6. Use a pry bar to remove three clips from the fender liner
7. Pull the liner away to access a 10mm bolt on the headlight assembly
8. Use a 10mm socket to loosen the bolt from the headlight assembly inside the fender
9. Carefully remove the headlight assembly
10. Replace the headlight assembly or any blown bulbs
11. Make sure the headlight is aligned properly before pushing into position
12. Installation is the reverse of removal
TOOLS USED:
1. 7mm Socket
2. 10mm Socket
3. 3/8 Ratchet
4. Drill (Optional)
5. Pry Bar
This is a how-to video for the “Do-It-Yourselfer” working in the home, driveway or garage. No fancy or crazy expensive tools. I'll show you step by step how to get the job done!
*If the video was helpful, remember to give it a "thumbs up" and consider subscribing*
Music by @tru_inferno: https://truinferno.bandcamp.com
Disclaimer:
Due to factors beyond the control of Steven Wimberley & WorkingWithWimberley, I cannot guarantee against improper use or unauthorized modifications of this information. Steven Wimberley & WorkingWithWimberley assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Steven Wimberley & WorkingWithWimberley recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Steven Wimberley & WorkingWithWimberley, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Steven Wimberley & WorkingWithWimberley.
0:00 Intro
0:15 Remove Grill Bolts
1:15 Remove Top Headlight Bolts
2:00 Remove Bolts Inside Fender
3:30 Remove Headlight Assembly
4:25 Reinstall Headlight Assembly
5:03 Outro
GMC Yukon Headlight Replacement & Bulb Removal How-To Change Headlight Bulb Assembly 2007-2014 XL #WorkingWithWimberley Episode 25
►Support the Channel & Purchase WorkingWithWimberley Mug!◄
www.workingwithwimberley.com
As an Amazon Associate I earn from qualifying purchases
Headlight Assembly: https://amzn.to/2RHauXv
Tail Light Assembly: https://amzn.to/3VwypZe
Grill (Upper): https://amzn.to/3ngUU1z
Grill (Lower): https://amzn.to/3n2NC1c
Craftsman Socket Set: https://amzn.to/37fwBZW
Drill Combo Set: https://amzn.to/2E6JeJU
GoPro Hero 7 Black (What I Use to Record): https://amzn.to/2NCDCwf
► Subscribe: https://www.youtube.com/WorkingWithWi...
► Website: http://www.workingwithwimberley.com
► Instagram: Instagram: workingwithwimberley
► Facebook: Facebook: WorkingWithWimberley
► Twitter: Twitter: wkwithwimberley
► YouTube: workingwithwimberley
STEPS:
1. Use a 7mm socket to remove two bolts from the grill
2. Use a 10mm socket to remove six bolts from the grill
3. Use a 10mm socket to remove two bolts from the top of the headlight assembly
4. Turn the tire to the side to access the inner fender liner
5. Use a 7mm socket to remove two bolts from the fender liner
6. Use a pry bar to remove three clips from the fender liner
7. Pull the liner away to access a 10mm bolt on the headlight assembly
8. Use a 10mm socket to loosen the bolt from the headlight assembly inside the fender
9. Carefully remove the headlight assembly
10. Replace the headlight assembly or any blown bulbs
11. Make sure the headlight is aligned properly before pushing into position
12. Installation is the reverse of removal
TOOLS USED:
1. 7mm Socket
2. 10mm Socket
3. 3/8 Ratchet
4. Drill (Optional)
5. Pry Bar
This is a how-to video for the “Do-It-Yourselfer” working in the home, driveway or garage. No fancy or crazy expensive tools. I'll show you step by step how to get the job done!
*If the video was helpful, remember to give it a "thumbs up" and consider subscribing*
Music by @tru_inferno: https://truinferno.bandcamp.com
Disclaimer:
Due to factors beyond the control of Steven Wimberley & WorkingWithWimberley, I cannot guarantee against improper use or unauthorized modifications of this information. Steven Wimberley & WorkingWithWimberley assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Steven Wimberley & WorkingWithWimberley recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Steven Wimberley & WorkingWithWimberley, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Steven Wimberley & WorkingWithWimberley.
0:00 Intro
0:15 Remove Grill Bolts
1:15 Remove Top Headlight Bolts
2:00 Remove Bolts Inside Fender
3:30 Remove Headlight Assembly
4:25 Reinstall Headlight Assembly
5:03 Outro
GMC Yukon Headlight Replacement & Bulb Removal How-To Change Headlight Bulb Assembly 2007-2014 XL #WorkingWithWimberley Episode 25
6 سال پیش
در تاریخ 1397/10/14 منتشر شده
است.
321,354
بـار بازدید شده