Peugeot 107 Indicator Stalk Repair, "No New Parts" Same as Aygo, C1 CityBug
155.7 هزار بار بازدید -
4 سال پیش
-
Indicators Not Working Turning Right
Indicators Not Working Turning Right / Left, How To Remove & Repair Stalk.
This is a common fault on the City Bugs, Toyota Aygo, Peugeot 107, Citroen C1,
This Peugeot 107 Has only done 33000 miles and the indicators have been gradually getting worse, until they completely stopped working on right turns.
I was able to remove the stalk and successfully repair it, with no issues.
The stalks from the main dealer very expensive, around £130.
Link to new stalk on amazon £18 https://amzn.to/3jtpgy3
Links to all tools used, https://www.amazon.co.uk/shop/aaanton11
Link to Silicone grease (optional) £6 https://amzn.to/2JOmD80
Link to Milwaukee Bit Box £12 https://amzn.to/2xT2efo
I have has a few comments about the main beam being stuck on after rebuild, thanks to Stuart brown for this great information:-
Thanks for this excellent video, I wouldn't have attempted this without these detailed instructions showing every step - the indicators on my daughter's 56 plate 107 now working again! Also had the problem with main beam stuck on first time - found there is a piece a plastic (visible above your thumb and forefinger holding the cotton bud at 20:15) which isn't fixed and can jump off the little knob below it, and end up sitting in front of it instead of on top of it. This stops the stalk moving between the dip and main beam positions, and seems to force main beam on. Worked fine once taken apart (again!) and returned to the right position.
Hope this helps someone else.
#citybug #peugeot107 #toyotaaygo #citroenc1
This is a common fault on the City Bugs, Toyota Aygo, Peugeot 107, Citroen C1,
This Peugeot 107 Has only done 33000 miles and the indicators have been gradually getting worse, until they completely stopped working on right turns.
I was able to remove the stalk and successfully repair it, with no issues.
The stalks from the main dealer very expensive, around £130.
Link to new stalk on amazon £18 https://amzn.to/3jtpgy3
Links to all tools used, https://www.amazon.co.uk/shop/aaanton11
Link to Silicone grease (optional) £6 https://amzn.to/2JOmD80
Link to Milwaukee Bit Box £12 https://amzn.to/2xT2efo
I have has a few comments about the main beam being stuck on after rebuild, thanks to Stuart brown for this great information:-
Thanks for this excellent video, I wouldn't have attempted this without these detailed instructions showing every step - the indicators on my daughter's 56 plate 107 now working again! Also had the problem with main beam stuck on first time - found there is a piece a plastic (visible above your thumb and forefinger holding the cotton bud at 20:15) which isn't fixed and can jump off the little knob below it, and end up sitting in front of it instead of on top of it. This stops the stalk moving between the dip and main beam positions, and seems to force main beam on. Worked fine once taken apart (again!) and returned to the right position.
Hope this helps someone else.
#citybug #peugeot107 #toyotaaygo #citroenc1
4 سال پیش
در تاریخ 1399/01/19 منتشر شده
است.
155,709
بـار بازدید شده