How to fix error please plug out charger problem | 100% Tested
206.3 هزار بار بازدید -
6 سال پیش
-
How to fix error please
How to fix error please plug out charger problem
This implies 1 of 2 things.
A. The telephone is fluid harmed, and the bind around the charging port is consumed.
or on the other hand
B. The charging port is coming somewhat free, or a portion of the cushions have split a bit.
To settle A. Clean extremely well with 91% Rubbing Alcohol and toothbrush, and take a touch of warming firearm from a revamp station, temp set at 349C for me, and move the weapon forward and backward over the port gradually and relentlessly, until the point when you see the weld liquefy, lift the firearm away and kill, let the bind re-set itself. Endeavor to charge it at that point.
To settle B. attempt An's answer first. On the off chance that it doesn't work, purchase the charging port off the web for your telephone, warm up the bind, and delicately pull the charging port upward off the board, guaranteeing the cushions are remaining on the board. Warmth the bind back up, and put the better and brighter one in the correct spot, in the correct heading. Give it a chance to set, chill off for 10+ minutes, and attempt it.
For fluid harmed telephones I clean the board extremely well with a blend of Alcohol and scouring bubbles froth on the whole board. Removing the board from the telephone obviously.
please subscribe my channel
like, share and comment.
This implies 1 of 2 things.
A. The telephone is fluid harmed, and the bind around the charging port is consumed.
or on the other hand
B. The charging port is coming somewhat free, or a portion of the cushions have split a bit.
To settle A. Clean extremely well with 91% Rubbing Alcohol and toothbrush, and take a touch of warming firearm from a revamp station, temp set at 349C for me, and move the weapon forward and backward over the port gradually and relentlessly, until the point when you see the weld liquefy, lift the firearm away and kill, let the bind re-set itself. Endeavor to charge it at that point.
To settle B. attempt An's answer first. On the off chance that it doesn't work, purchase the charging port off the web for your telephone, warm up the bind, and delicately pull the charging port upward off the board, guaranteeing the cushions are remaining on the board. Warmth the bind back up, and put the better and brighter one in the correct spot, in the correct heading. Give it a chance to set, chill off for 10+ minutes, and attempt it.
For fluid harmed telephones I clean the board extremely well with a blend of Alcohol and scouring bubbles froth on the whole board. Removing the board from the telephone obviously.
please subscribe my channel
like, share and comment.
6 سال پیش
در تاریخ 1397/06/29 منتشر شده
است.
206,340
بـار بازدید شده