How to Finish and Polish an Enamel Cloisonné Piece
12.4 هزار بار بازدید -
10 سال پیش
-
Anie shows how you can
Anie shows how you can Sand, Clean up edges and polish a piece of Enamel Cloisonné.
Abrasives used:
3M Flex Diamond Grinding (VERY COARSE) * (SEE NOTE BELOW)
3M Microfinishing Diamond 45 Micron Medium
3M Microfinishing Diamond 20 Micron Very Fine
JOOLTOOL See-Thru Felt Disc
3M Cerium Oxide polishing abrasive
The 45 and 20 micron Diamond abrasives and the Cerium Oxide disc are cushioned (with 3M Bumpon Cushion pads applied to Backpads before sticking the abrasives over them)
See more info at: www.jooltool.com
(c) JOOLTOOL, 3M and all logos are trademarks of their respective owners and used under license.
Abrasives used:
3M Flex Diamond Grinding (VERY COARSE) * (SEE NOTE BELOW)
3M Microfinishing Diamond 45 Micron Medium
3M Microfinishing Diamond 20 Micron Very Fine
JOOLTOOL See-Thru Felt Disc
3M Cerium Oxide polishing abrasive
The 45 and 20 micron Diamond abrasives and the Cerium Oxide disc are cushioned (with 3M Bumpon Cushion pads applied to Backpads before sticking the abrasives over them)
See more info at: www.jooltool.com
(c) JOOLTOOL, 3M and all logos are trademarks of their respective owners and used under license.
10 سال پیش
در تاریخ 1394/01/04 منتشر شده
است.
12,472
بـار بازدید شده