Honda CB750 Cafe Racer Build - Gas Tank Dent Repair
69.4 هزار بار بازدید -
8 سال پیش
-
Make sure to SUBSCRIBE and
Make sure to SUBSCRIBE and never miss a video!! / @forever-2-wheels
The gas tank on my CB project bike has a dent on the rear side that I attempted to repair with a paintless dent puller that I picked up from Harbor Freight tools for cheap.
Here is the process I went through to try to remove, or at least, partially repair the dent. The rule of "you get what you pay for" reared its ugly head here, as the dent puller that only cost me $13.00 pretty much failed to do much of anything. It might be fine for small dings in your car door, but unfortunately I used every last bit of the glue that came with the kit so I won't be able to try that theory. Maybe I was being too optimistic and should have tried to work from the edge toward the center of the dent, I'm not real sure. The glue didn't stick well enough to really try anyway. It might have helped a little bit, but the dent is still there.
Harbor Freight dent puller -- www.harborfreight.com/crossbar-dent-repair-kit-669…
8 سال پیش
در تاریخ 1395/12/04 منتشر شده
است.
69,456
بـار بازدید شده