Installing a Sand Point Well at the Off-Grid Cabin
364.6 هزار بار بازدید -
5 سال پیش
-
I used a non-galvanized pipe
I used a non-galvanized pipe because I am using the water for trees and it is cheaper. If you plan on drinking it I highly suggest using galvanized)
Hauling water from the creek is time-consuming. Getting a professional rig out in the woods is problematic and expensive. Time for some DIY well digging. I made mistakes and it was really hot but it eventually worked out. I will post information about the actual gear I used in the comments. It would have been better to have a partner help and you could relay the pounding. Overall, it was a gratifying experience to produce water. I was lucky that the water table was nice and high. If there is anything I could have done to make the process more efficient for others please comment below. If we can save people time or money, great. Thanks for watching.
Here is the model # for the sand point: Watersource Stainless Steel Well Point - For 1 1/4in. Pipe, Model# WP3680
#prepper #preppersupplies
Hauling water from the creek is time-consuming. Getting a professional rig out in the woods is problematic and expensive. Time for some DIY well digging. I made mistakes and it was really hot but it eventually worked out. I will post information about the actual gear I used in the comments. It would have been better to have a partner help and you could relay the pounding. Overall, it was a gratifying experience to produce water. I was lucky that the water table was nice and high. If there is anything I could have done to make the process more efficient for others please comment below. If we can save people time or money, great. Thanks for watching.
Here is the model # for the sand point: Watersource Stainless Steel Well Point - For 1 1/4in. Pipe, Model# WP3680
#prepper #preppersupplies
5 سال پیش
در تاریخ 1398/04/28 منتشر شده
است.
364,696
بـار بازدید شده