Installing LED Upgrade On Our Ender 3 Pro - Printermods.com Light Review
4.2 هزار بار بازدید -
2 سال پیش
-
Cheap and easy upgrade for
Cheap and easy upgrade for all printers!
Welcome to (does stuff)! Our Creality Ender 3 Pro printer has been working amazing but I was always using my phone or flashlight to try and see the first layer and was becoming annoyed. I researched different was of adding LED light strip to the upper bar and the hot end and stumbled across this pre-made kit from printermods.com. Here's a link to the kit I used.
https://printermods.com/collections/l...
Make sure you check to make wether your 3D printer is running 12v or 24v power supply - you could end up letting all the magic smoke out if you don't! Your power supply should have it on the label or you can check it with voltage meter.
Like the video??? Please click the link to subscribe and promise (maybe) not to let you down!
@matthewfinlay
Hows it work??? Amazing - While I only recommend using them as a pair so you don't create a shadow with the v-slot only or not enough light with the hotend light. I love it and for only $20 - it was one of the simplest and best ease of use modifications I've made to our printer. V2
#creality #3dprinting
Welcome to (does stuff)! Our Creality Ender 3 Pro printer has been working amazing but I was always using my phone or flashlight to try and see the first layer and was becoming annoyed. I researched different was of adding LED light strip to the upper bar and the hot end and stumbled across this pre-made kit from printermods.com. Here's a link to the kit I used.
https://printermods.com/collections/l...
Make sure you check to make wether your 3D printer is running 12v or 24v power supply - you could end up letting all the magic smoke out if you don't! Your power supply should have it on the label or you can check it with voltage meter.
Like the video??? Please click the link to subscribe and promise (maybe) not to let you down!
@matthewfinlay
Hows it work??? Amazing - While I only recommend using them as a pair so you don't create a shadow with the v-slot only or not enough light with the hotend light. I love it and for only $20 - it was one of the simplest and best ease of use modifications I've made to our printer. V2
#creality #3dprinting
2 سال پیش
در تاریخ 1400/11/15 منتشر شده
است.
4,207
بـار بازدید شده