How To Replace Front Control Arm 2007-2012 Nissan Sentra
42.9 هزار بار بازدید -
3 سال پیش
-
Buy Now!New Control Arm with
Buy Now!
New Control Arm with Ball Joint from 1AAuto.com http://1aau.to/ia/1ASLF00641
*Correction* The torque stated at 6:01 should be 125 ft-lbs.
Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear, or integrated ball joints that require replacing the entire arm when they wear. This video shows you how to install a new quality TRQ lower control arm with ball joint in your 2007-2012 Nissan Sentra.
0:00 How To Replace Front Control Arm 2007-2012 Nissan Sentra
6:01 CORRECTION : 125 ft-lbs
6:31 How To Replace Front Control Arm 2007-2012 Nissan Sentra
This process should be similar on the following vehicles:
2007 Nissan Sentra
2008 Nissan Sentra
2009 Nissan Sentra
2010 Nissan Sentra
2011 Nissan Sentra
2012 Nissan Sentra
Tools you will need:
• 21mm Socket http://1aau.to/om4/1AXAA00043
• 32mm Socket http://1aau.to/oS/1AAST00003
• Pickle Fork
• Straight Cutters
• 3/8 Inch Impact Gun
• Socket Driver
• Swivel
• Torque Wrench http://1aau.to/orv/1AXAA00044
• Liquid Thread Locker
• Rust Penetrant
• Center Punch http://1aau.to/obD/1AXAA00055
• Floor Jack http://1aau.to/oi4/1AXAA00068
• Hammer http://1aau.to/ohK/1AXAA00091
• Jack Stands http://1aau.to/oid/1AXAA00065
• Wire Brush http://1aau.to/ocT/1AXAA00079
Subscribe: @trq
Check out our playlist:
Nissan Sentra 2007-2012: Nissan Sentra 2007-2012
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
New Control Arm with Ball Joint from 1AAuto.com http://1aau.to/ia/1ASLF00641
*Correction* The torque stated at 6:01 should be 125 ft-lbs.
Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear, or integrated ball joints that require replacing the entire arm when they wear. This video shows you how to install a new quality TRQ lower control arm with ball joint in your 2007-2012 Nissan Sentra.
0:00 How To Replace Front Control Arm 2007-2012 Nissan Sentra
6:01 CORRECTION : 125 ft-lbs
6:31 How To Replace Front Control Arm 2007-2012 Nissan Sentra
This process should be similar on the following vehicles:
2007 Nissan Sentra
2008 Nissan Sentra
2009 Nissan Sentra
2010 Nissan Sentra
2011 Nissan Sentra
2012 Nissan Sentra
Tools you will need:
• 21mm Socket http://1aau.to/om4/1AXAA00043
• 32mm Socket http://1aau.to/oS/1AAST00003
• Pickle Fork
• Straight Cutters
• 3/8 Inch Impact Gun
• Socket Driver
• Swivel
• Torque Wrench http://1aau.to/orv/1AXAA00044
• Liquid Thread Locker
• Rust Penetrant
• Center Punch http://1aau.to/obD/1AXAA00055
• Floor Jack http://1aau.to/oi4/1AXAA00068
• Hammer http://1aau.to/ohK/1AXAA00091
• Jack Stands http://1aau.to/oid/1AXAA00065
• Wire Brush http://1aau.to/ocT/1AXAA00079
Subscribe: @trq
Check out our playlist:
Nissan Sentra 2007-2012: Nissan Sentra 2007-2012
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
3 سال پیش
در تاریخ 1400/10/01 منتشر شده
است.
42,949
بـار بازدید شده