Remotely access any system with a PiKVM and Tailscale

Remotely accessing a physical system as if you are there was the reserve of expensive "server grade" gear until quite recently. PiKVM changes that. In today's video Alex will walk you through the process of configuring PiKVM with Tailscale, and show you a neat trick to control up to 8 servers at once.

Personal accounts are always free on Tailscale and can include up to 3 users and 100 devices. Get started today at https://tailscale.com/yt

Supporting links:
- https://pikvm.org/
- https://docs.pikvm.org/tailscale/
- https://tailscale.com/kb/1292/pikvm

Code snippets:
- https://github.com/tailscale-dev/vide...

Hardware links:
- PiKVM v4 Official Product - https://cloudfree.shop/product/pikvm-...
- HDMI CSI Bridge - https://www.amazon.com/Geekworm-Raspb...
- USB Splitter - https://www.amazon.com/USB-Splitter-R...
- Raspberry Pi 4 - https://www.amazon.com/Raspberry-Mode...
- Tesmart 8 port KVM Switch - https://www.amazon.com/TESmart-Enterp...

===

00:00 - Start
01:47 - PiKVM Overview
05:28 - Installation prep
09:42 - Installing Tailscale on PiKVM
11:37 - Configuring Tailscale
14:47 - Subnet routers and exit nodes
16:43 - Key expiry
17:27 - 8 port switching
21:06 - PiKVM Overview