Boss RC-505 & FCB1010 Midi Controller (Part 2)
13.7 هزار بار بازدید -
7 سال پیش
-
Part 2/3
Especially for guitar,
Part 2/3
Especially for guitar, bass and other players who need their hands to play an instrument. This 3 part video explains how to configure the Boss RC-505 so it can be controlled via a FCB1010 Midi controller.
Gear used in the video:
Boss RC-505 - www.thomann.de/gb/boss_rc_505.htm?partner_id=12543
Behringer FCB1010 - www.thomann.de/gb/behringer_fcb_1010.htm?partner_i…
5 Pin Midi Cable - www.thomann.de/gb/the_sssnake_sk366-3-blk_midi_kab…
Each of the 5 channels will get a Rec-Overdub - play button and an undo but other configurations are possible.
The FCB1010 is equiped with a UNO chip because StompBox mode is required. You can get more info on this on www.fcb1010.eu
A list of the Midi parameters on the RC-505:
RC-505 SW: Version 2.0
Midi Channel used is channel 1
System config of the RC-505:
Sys:MIDI Rx Ch 1
Sys:MIDI Omni ON
Sys:MIDI Tx Ch Rx (not used)
Sys:MIDI Sync AUTO
Sys:MIDI SyncSrc USB(AUTO)
Sys:MIDI PC Out OFF
Phrase Memory Settings
Assign1 Switch ON
Assign1 Source #CC21
Assign1 Src Mode MOMENT
Assign1 Target TR1 REC/PLAY
Assign1TargetMin ----------------
Assign1TargetMax ----------------
Assign2 Switch ON
Assign2 Source #CC22
Assign2 Src Mode MOMENT
Assign2 Target TR2 REC/PLAY
Assign2 TargetMin ----------------
Assign1TargetMax ----------------
etc.
7 سال پیش
در تاریخ 1396/09/16 منتشر شده
است.
13,789
بـار بازدید شده