Maintenance on my Laguna iQ and my upgraded cooling system
3.9 هزار بار بازدید -
5 سال پیش
-
MI know I said Z
MI know I said Z axes when I meant Y when I was greasing.
I use a grease gun with a needle type fitting to grease the linear bearings on my CNC and hand grease the ball screws.
I also show the cooling system changes I made to get rid of the 5 gallon bucket and cheap pump they send with the machine.
pump
https://www.ebay.ca/itm/220V-100W-3-S...
bulkhead
https://www.amazon.ca/gp/product/B000...
flow indicater
https://www.amazon.ca/gp/product/B07R...
gas tank
https://www.princessauto.com/en/detai...
Radiator
https://www.amazon.ca/Semoic-Radiator...
I use a grease gun with a needle type fitting to grease the linear bearings on my CNC and hand grease the ball screws.
I also show the cooling system changes I made to get rid of the 5 gallon bucket and cheap pump they send with the machine.
pump
https://www.ebay.ca/itm/220V-100W-3-S...
bulkhead
https://www.amazon.ca/gp/product/B000...
flow indicater
https://www.amazon.ca/gp/product/B07R...
gas tank
https://www.princessauto.com/en/detai...
Radiator
https://www.amazon.ca/Semoic-Radiator...
5 سال پیش
در تاریخ 1398/11/20 منتشر شده
است.
3,957
بـار بازدید شده