Hyundai / Kia 2.4L GDI Engine - How To Oil Pump Refurbish & Clean

This refurb / clean up video can be performed on any 2.4L Hyundai / Kia GDI engine with the dual balance shaft oil pump assembly. When doing a partial or complete engine rebuild, you may notice your oil pump sprocket appears seized or very difficult to turn. The pump may still be serviceable after a good cleaning in lieu of replacement with a expensive new one (around $800 at the dealership). Disassembling and cleaning up the pump internals can bring it back to good operational condition. I've rebuilt 8 of these Hyundai / Kia 2.4 GDI engines due to spun / disintegrated / worn connecting rod bearings as well as worn or stuck pistons rings. Metallic debris from these worn engine parts can work their way into the pump and accumulate at pump balance shaft holes and journal bearing surfaces. Torque Specs: Front 8 mm cover bolts: 10 lbs Top 10 mm cover bolts: 18 lbs followed by 45 degree angle torque If you'd like to make a donation to the channel, please follow the link below: paypal.me/HardlyMoving?locale.x=en_US Parts & Tools: Sealed Power 1934M Balance Shaft Bearing Set (was told by one of my subscribers that these bearings will work as a replacement) amzn.to/3Q9F60q If you just want to replace the pump with a new aftermarket pump: Oil Pump Balance Shaft Assembly Compatible for 2012-2015 Optima 2.4L, for 2010-2014 Sonata 2.4L Auto parts OE 23300-2G520 amzn.to/45XSSe4 Permatex 81950 Ultra Slick Engine Assembly Lube, 4 oz. , Red amzn.to/3VUDU1I 3/4" or 45mm Drive Hand Socket amzn.to/3jZZ2GA CRAFTSMAN Shallow Impact Socket, Metric, 1/2-Inch Drive, 17mm amzn.to/3VUCNzf As an Amazon associate, I earn from qualifying purchases. Thank you for your support! Please Subscribe: goo.gl/x6fySQ #sonata