ABC Brass Hammers - MADE IN USA
21.7 هزار بار بازدید -
10 سال پیش
-
Get the ABC Brass Hammers
Get the ABC Brass Hammers at Amazon --- http://www.amazon.com/s/ref=nb_sb_nos...
I ran across these when looking for a replacement for some older worn out brass & bronze hammers that I had. I was surprised to see that they are Made in the USA & thought I would give them a try.
These are cast brass....meaning they are molded into their shape with molten brass & not merely cut bar-stock that is tapped with a hole & a handle added. They are extremely well balanced & tight fitted to the handles (both wooden & fiberglass).
Brass hammers are much better than steel hammers in many circumstances since they are non-marring, non-sparking, and very corrosion resistant.
Non-sparking means that if you work around combustible materials, fluids, or gases, there wont be danger from the hammer hitting an object and starting a fire/explosion.
Non-marring means that the brass is softer than the steel you will be hitting, so any damage will be sustained by the hammer head itself & wont deform the object that you are striking. This is especially important when working on a vehicle suspension or bolts/fasteners.
Check them out, the hammers are top quality & Made In The USA!
I ran across these when looking for a replacement for some older worn out brass & bronze hammers that I had. I was surprised to see that they are Made in the USA & thought I would give them a try.
These are cast brass....meaning they are molded into their shape with molten brass & not merely cut bar-stock that is tapped with a hole & a handle added. They are extremely well balanced & tight fitted to the handles (both wooden & fiberglass).
Brass hammers are much better than steel hammers in many circumstances since they are non-marring, non-sparking, and very corrosion resistant.
Non-sparking means that if you work around combustible materials, fluids, or gases, there wont be danger from the hammer hitting an object and starting a fire/explosion.
Non-marring means that the brass is softer than the steel you will be hitting, so any damage will be sustained by the hammer head itself & wont deform the object that you are striking. This is especially important when working on a vehicle suspension or bolts/fasteners.
Check them out, the hammers are top quality & Made In The USA!
10 سال پیش
در تاریخ 1393/03/27 منتشر شده
است.
21,713
بـار بازدید شده