Leistung einstellen beim FTM-100

In diesem Video Zeige ich euch, wie man beim FTM-100, die Leistung über das Service-Menu (alignment mode) einstellen kann.

Für Schäden die bei der Umsetzung dieser Anleitung entstehen übernehme ich keine Haftung.

73 de HB9EZW

------------------------ ENGLISH ------------------------
DO THIS AT YOUR OWN RISK! DON'T BLAME ME IF YOU BLOW UP YOUR FINALS!

If you're in Wires-X Mode, leave it (Turning on the radio while holding down DX and GM buttons).
If you've changed sub band display to voltage or clock, change it back to frequency (otherwise you won't see the menu items in alignment mode!)
Then use following procedure:
- turn the radio off
- turn it back on while holding down A/B and GM buttons (you won't notice anything special right now!)
- lock the keypad
- enter following code via the DTMF-microphone: 048048
- the radio reboots into alignment mode (service menu)
- unlock the keypad
- with microphone key P1 scroll to menu item "2 PWR"
- set desired band and power level (HI/MID/LO)
- NOTE THE ORIGINAL VALUE!
- if you don't have a power meter inline, connect it now
- push and hold PTT while adjusting power level with the DIAL-knob
- if desired, repeat the last three steps for other powerlevel/band combinations
- turn off and on the radio
- you're done!