Hit and miss engine
5.1 هزار بار بازدید -
ماه قبل
-
Check out my home page
Check out my home page and go to community to see picture of the tank cooled engine build
I have put this before here are some close up
the main body has some what of the shape of a Bates&Edmonds the side shaft from some other engine i seen all the parts i made from steel
everything is shop made depending on the engine 15 to 20 lbs of welding rods and many grinding wheels
anywhere from 500 hours and up
never ran great the igniter has given me lots of trouble seem to have that fixed now
and just put a lighter intake spring
this was the second of 5 home made engines
the flywheel and crank from 4 hp London
sleeve and piston 3 hp international M
igniter marine engine
I have put this before here are some close up
the main body has some what of the shape of a Bates&Edmonds the side shaft from some other engine i seen all the parts i made from steel
everything is shop made depending on the engine 15 to 20 lbs of welding rods and many grinding wheels
anywhere from 500 hours and up
never ran great the igniter has given me lots of trouble seem to have that fixed now
and just put a lighter intake spring
this was the second of 5 home made engines
the flywheel and crank from 4 hp London
sleeve and piston 3 hp international M
igniter marine engine
ماه قبل
در تاریخ 1403/04/23 منتشر شده
است.
5,188
بـار بازدید شده