How-To: Keel Rebuild - Repair Holes Caused By Dragging Your Kayak
115.9 هزار بار بازدید -
3 سال پیش
-
In this video, we are
In this video, we are going to show you how to rebuild your keel if you have created a hole from dragging the back of the kayak across the ground. These holes can look pretty nasty, but with a few tools from the local hardware store and some extra plastic, you can easily complete the rebuild process in 1-2 hours on your own.
To start, there are going to be a few things you need:
- Sandpaper - 120, 220 and 320 grit (or similar grits)
- Cutters or Dikes
- A large & a small set of needle nose pliers
- Steel brush or drill with steel brush attachment
- Rasp & File
- Assorted sizes of Acrylic screwdrivers
- A long skinny metal probe (long flat-head screwdriver works)
- Heat-Gun
- Scrap Plastic
- Cup for water
Most of these items can be found fairly easily. If you need help sourcing some scrap plastic for your repair, contact one of our shops!
If you have any questions about your own kayak project, feel free to reach out to us!
To start, there are going to be a few things you need:
- Sandpaper - 120, 220 and 320 grit (or similar grits)
- Cutters or Dikes
- A large & a small set of needle nose pliers
- Steel brush or drill with steel brush attachment
- Rasp & File
- Assorted sizes of Acrylic screwdrivers
- A long skinny metal probe (long flat-head screwdriver works)
- Heat-Gun
- Scrap Plastic
- Cup for water
Most of these items can be found fairly easily. If you need help sourcing some scrap plastic for your repair, contact one of our shops!
If you have any questions about your own kayak project, feel free to reach out to us!
3 سال پیش
در تاریخ 1400/06/04 منتشر شده
است.
115,989
بـار بازدید شده