MANUFACTURING 3-INCH ANTI-AIRCRAFT SHELLS WORLD WAR II ORDNANCE FILM FRANKFORD ARSENAL 10414
1.2 میلیون بار بازدید -
4 سال پیش
-
Want to support this channel
Want to support this channel and help us preserve old films? Visit Patreon: PeriscopeFilm
Browse our products on Amazon: https://amzn.to/2YILTSD
This black & white promotional/educational film is about making shells in populated areas of the USA. The date of the production is 1939 based on the title credits.
Credits: Produced by The Signal Corps in collaboration with the Chief of Ordnance 1939 - Manufacturing Shell For 3 inch Anti-Aircraft Guns (:07-:27). This film will show how make the shell our narrator tells us at the Frankford Arsenal factory in Philadelphia, PA. Exterior shots of the factory are shown. This was made to show that there are no hazards with building shells in populated areas (:28-1:07). Steel bars are shown whole and then being cut. Size is discussed. Men in the factory are at work. How to make the shell is explained and shown. The bar is shown before heating and then in succession based on what station, first, second, third, and fourth and final station. The forging is shown. A crank press shears them. The outer shell is seen going into the air outside for cooling (1:08-4:31). Our workers continue to make them. The rotating bands are cut. Walls of the shell are used as a test specimen (4:32-7:05). Forgings are placed into a machine to smooth since the explosives are to be loaded into this cavity. They are then sent to the shell machining shop. The shell is centered. All of the procedure is shown and explained. Process inspection follows. The shell is played with and made sure to be of use (7:06-10:47). The shell is placed into a drilling and tap machine. Watch as the process continues. More of the procedure is shown. Lots of closeups of the machines at work. Slow and thorough. The shell is almost done. Base is finished (10:48-13:16). The shell is notched next. Stamping machine is next. The process continues as it continues on its way. A band is going to be placed onto the shell. It is time to have it be ready for its finished size, this is shown. A steel disc is welded to the base of the shell (13:17-17:01). Washed in a hot bath is next for the shell. Final inspection table is next. Size and specs it should be are listed. Dimensional and weight tolerances have been given to the shell and must be abided by. Workers work on and weigh the shell casings (17:02-19:00). Men lift the casings. A protective coating grease is placed on the approved ones. Final steps performed on the shells. Shells then packed to be shipped to the assembly plant (19:01-20:24). End credit (20:25-20:31).
The Frankford Arsenal is a former United States Army ammunition plant located adjacent to the Bridesburg neighborhood of Northeast Philadelphia, Pennsylvania, north of the original course of Frankford Creek. The Frankford Arsenal was an entity unto itself, a virtual city within a city, and contained everything from its own police and fire departments, dining halls, motor pool, and a complete medical facility. The Arsenal was part of the U.S. Arsenal System—dedicated military establishments spread throughout the country to perform specific military missions for the Government.
From the beginning, the Frankford Arsenal was involved in the design and manufacture of munitions. As military weapons became more complex, the Center's role expanded to cover the development of a whole range of the Army's more advanced weapon systems. The Arsenal contained the world-famous Pitman-Dunn Laboratories along with a number of other R&D departments. Arsenal scientists and engineers designed and developed everything from basic materials to LASER guided ballistics, all produced entirely in-house from the concept phase to the fielding of the equipment. New portable and imbedded computer applications saw the development of the LASER rangefinder, fielded artillery computational machines (FADAC) and radar systems. During the Vietnam War, experiments in caseless ammunition, far-infrared low-light-level technologies, and advanced LASER applications were under development.
As the U.S. military-industrial complex grew, the Arsenal could no longer compete as a manufacturing entity. More and more of its programs were farmed out to industry. The Arsenal's functions were eventually transferred to the Picatinny Arsenal in New Jersey.
We encourage viewers to add comments and, especially, to provide additional information about our videos by adding a comment! See something interesting? Tell people what it is and what they can see by writing something for example: "01:00:12:00 -- President Roosevelt is seen meeting with Winston Churchill at the Quebec Conference."
This film is part of the Periscope Film LLC archive, one of the largest historic military, transportation, and aviation stock footage collections in the USA. Entirely film backed, this material is available for licensing in 24p HD, 2k and 4k. For more information visit http://www.PeriscopeFilm.com
Browse our products on Amazon: https://amzn.to/2YILTSD
This black & white promotional/educational film is about making shells in populated areas of the USA. The date of the production is 1939 based on the title credits.
Credits: Produced by The Signal Corps in collaboration with the Chief of Ordnance 1939 - Manufacturing Shell For 3 inch Anti-Aircraft Guns (:07-:27). This film will show how make the shell our narrator tells us at the Frankford Arsenal factory in Philadelphia, PA. Exterior shots of the factory are shown. This was made to show that there are no hazards with building shells in populated areas (:28-1:07). Steel bars are shown whole and then being cut. Size is discussed. Men in the factory are at work. How to make the shell is explained and shown. The bar is shown before heating and then in succession based on what station, first, second, third, and fourth and final station. The forging is shown. A crank press shears them. The outer shell is seen going into the air outside for cooling (1:08-4:31). Our workers continue to make them. The rotating bands are cut. Walls of the shell are used as a test specimen (4:32-7:05). Forgings are placed into a machine to smooth since the explosives are to be loaded into this cavity. They are then sent to the shell machining shop. The shell is centered. All of the procedure is shown and explained. Process inspection follows. The shell is played with and made sure to be of use (7:06-10:47). The shell is placed into a drilling and tap machine. Watch as the process continues. More of the procedure is shown. Lots of closeups of the machines at work. Slow and thorough. The shell is almost done. Base is finished (10:48-13:16). The shell is notched next. Stamping machine is next. The process continues as it continues on its way. A band is going to be placed onto the shell. It is time to have it be ready for its finished size, this is shown. A steel disc is welded to the base of the shell (13:17-17:01). Washed in a hot bath is next for the shell. Final inspection table is next. Size and specs it should be are listed. Dimensional and weight tolerances have been given to the shell and must be abided by. Workers work on and weigh the shell casings (17:02-19:00). Men lift the casings. A protective coating grease is placed on the approved ones. Final steps performed on the shells. Shells then packed to be shipped to the assembly plant (19:01-20:24). End credit (20:25-20:31).
The Frankford Arsenal is a former United States Army ammunition plant located adjacent to the Bridesburg neighborhood of Northeast Philadelphia, Pennsylvania, north of the original course of Frankford Creek. The Frankford Arsenal was an entity unto itself, a virtual city within a city, and contained everything from its own police and fire departments, dining halls, motor pool, and a complete medical facility. The Arsenal was part of the U.S. Arsenal System—dedicated military establishments spread throughout the country to perform specific military missions for the Government.
From the beginning, the Frankford Arsenal was involved in the design and manufacture of munitions. As military weapons became more complex, the Center's role expanded to cover the development of a whole range of the Army's more advanced weapon systems. The Arsenal contained the world-famous Pitman-Dunn Laboratories along with a number of other R&D departments. Arsenal scientists and engineers designed and developed everything from basic materials to LASER guided ballistics, all produced entirely in-house from the concept phase to the fielding of the equipment. New portable and imbedded computer applications saw the development of the LASER rangefinder, fielded artillery computational machines (FADAC) and radar systems. During the Vietnam War, experiments in caseless ammunition, far-infrared low-light-level technologies, and advanced LASER applications were under development.
As the U.S. military-industrial complex grew, the Arsenal could no longer compete as a manufacturing entity. More and more of its programs were farmed out to industry. The Arsenal's functions were eventually transferred to the Picatinny Arsenal in New Jersey.
We encourage viewers to add comments and, especially, to provide additional information about our videos by adding a comment! See something interesting? Tell people what it is and what they can see by writing something for example: "01:00:12:00 -- President Roosevelt is seen meeting with Winston Churchill at the Quebec Conference."
This film is part of the Periscope Film LLC archive, one of the largest historic military, transportation, and aviation stock footage collections in the USA. Entirely film backed, this material is available for licensing in 24p HD, 2k and 4k. For more information visit http://www.PeriscopeFilm.com
4 سال پیش
در تاریخ 1399/01/03 منتشر شده
است.
1,276,026
بـار بازدید شده