What Causes BAD Print Quality on the Ender 3 V3 KE? - Fast Bed Slinger
49.2 هزار بار بازدید -
7 ماه پیش
-
We're on a mission in
We're on a mission in this video to solve this strange surface quality issue on our New Ender 3 V3 KE
Help support this channel! Patreon: Needitmakeit
This is a follow up to the review video where we discovered the problem with what looked to be an extrusion issue, there was also a problem with too much 'slop' in the bearings below the bed for the Y axis movement.
In this video, we'll go through the process of finding the source of the problem by taking things apart in our usual style and then we'll run through a series of tests to prove or dis-prove the theorys.
I've printed with PETG, ABS, TPU, CF, ABS, ASA and PC, and I've never had this issue before. It seems to be related somehow to speed, but also possibly to the material, PETG seems to have more of this issue occurring, but I also can see the problem on PLA but to a lesser extent.
The KE runs with a Sprite style of DD extruder, and it looked to me to be a little under-engineered for the job, I thought that would be a good place to start...
Check out the full video for more info!
Another way to support this channel indirectly is through my affiliate links (where I receive a small commission). It helps me to continue to provide high-quality content videos. Thank you for your support!
NEW MIC (I bought this)
https://amzn.to/3vcMKAr - Rode Wireless ME mic (Saved me about 4+ hours/vid)
https://amzn.to/3NBFvZe - Mag clip (Super handy, but a little pricy)
BAMBU PRINTERS
https://shrsl.com/4aghz
CREALITY PRINTERS
https://shrsl.com/4aghy
CREALITY HYPER PLA
https://shrsl.com/4aghn
Here is a link to a solution by @DerrickDarrell
https://www.printables.com/model/6944...
#crealityKE
#crealityk1
#3dprinting
Help support this channel! Patreon: Needitmakeit
This is a follow up to the review video where we discovered the problem with what looked to be an extrusion issue, there was also a problem with too much 'slop' in the bearings below the bed for the Y axis movement.
In this video, we'll go through the process of finding the source of the problem by taking things apart in our usual style and then we'll run through a series of tests to prove or dis-prove the theorys.
I've printed with PETG, ABS, TPU, CF, ABS, ASA and PC, and I've never had this issue before. It seems to be related somehow to speed, but also possibly to the material, PETG seems to have more of this issue occurring, but I also can see the problem on PLA but to a lesser extent.
The KE runs with a Sprite style of DD extruder, and it looked to me to be a little under-engineered for the job, I thought that would be a good place to start...
Check out the full video for more info!
Another way to support this channel indirectly is through my affiliate links (where I receive a small commission). It helps me to continue to provide high-quality content videos. Thank you for your support!
NEW MIC (I bought this)
https://amzn.to/3vcMKAr - Rode Wireless ME mic (Saved me about 4+ hours/vid)
https://amzn.to/3NBFvZe - Mag clip (Super handy, but a little pricy)
BAMBU PRINTERS
https://shrsl.com/4aghz
CREALITY PRINTERS
https://shrsl.com/4aghy
CREALITY HYPER PLA
https://shrsl.com/4aghn
Here is a link to a solution by @DerrickDarrell
https://www.printables.com/model/6944...
#crealityKE
#crealityk1
#3dprinting
7 ماه پیش
در تاریخ 1402/11/14 منتشر شده
است.
49,283
بـار بازدید شده