Introduction to Eurocode 0 | EC0 | EN1990 | Basis of Structural Design | ULS | SLS
56.1 هزار بار بازدید -
5 سال پیش
-
This video provides an introduction
This video provides an introduction to EN 1990, combinations of actions and ultimate limit state and serviceability limit state.
Topics covered in the video:
00:00 - Introduction
+ Use with other Eurocodes
+ Safety factors needed for ULS and SLS verifications
+ Partial factors and combination factors
+ ULS checks (EQU, STR, GEO and FAT)**
+ SLS checks
01:05 - Combinations of Actions (Loads)
+ Permanent actions (Dead loads)
+ Variable actions (Live loads)
+ Accidental actions
01:40 - Combination factors, ψ
+ Equation 6.10
+ Equation 6.10a and 6.10b
+ Factors on actions
04:07 - Ultimate Limit State (ULS) - Combinations of actions
08:05 - Serviceability Limit State (SLS) - Combinations of actions
+ Characteristic combinations (Equation 6.14b)
+ Frequent combination (Equation 6.15b)
+ Quasi-permanent combination (Equation 6.16b)
08:31 - Example
12:02 - Example results (Most critical combination)
**
EQU - static equilibrium
STR - strength/buckling etc,
GEO - failure of excessive deformation of ground,
FAT - fatigue failure
📲 Download my RC Section App 📲
https://apps.apple.com/gb/app/rc-sect...
▶️ Watch Eurocode 3 Series
Part 01 - Introduction to Eurocode 3: Introduction to Eurocode 3 | EC3 | EN...
Part 02 - Introduction to Eurocode 0: Introduction to Eurocode 0 | EC0 | EN...
Part 03 - Eurocode 3 Structural Analysis: Eurocode 3 Structural Analysis | EC3 ...
Part 04 - Brittle Fracture: Brittle Fracture | Eurocode 3 | EC3 |...
Part 05 - Cross-section Classification + Buckling: Cross-section Classification & Resist...
Part 06 - Steel Beam Design - Bending + Example: Steel Beam Design - Bending + Example...
Part 07 - Steel Beam Design - Shear: Steel Beam Design - Shear | Combined ...
Part 08 - Steel Beam Design - SLS: Steel Beam Design - Serviceability Li...
Part 09 - Introduction to Lateral Torsional Buckling: Introduction to Lateral Torsional Buc...
Part 10 - Design Buckling Resistance Moment: How to Calculate Design Buckling Resi...
Part 11 - Design Buckling Resistance Examples: Calculation Examples of Design Buckli...
Part 12 - Steel Column - Compression Member Design: Steel Column Design | Compression Mem...
Part 13 - Steel Column - Buckling Resistance: Steel Column Design | Buckling Resist...
Part 14 - Steel Column - Buckling Example: Steel Column Design - Buckling Exampl...
Part 15 - Tension Member Design - Fastener Design: Steel Tension Member Design | Stagger...
Part 16 - Tension Member Design - Connections: Steel Tension Member Design | Welded ...
Part 17 - Axial Compression, Bending, Torsion: Steel Member Design | Axial Compressi...
Part 18 - Bolted Connections - Pinned & Fixed (Rigid): Steel Connections | Bolted Joint Desi...
Part 19 - Welded Connections - Pinned & Fixed (Rigid): Steel Connections | Welded Joint Desi...
🔔 Connect with Dilakshana Mayadunne 🔔
Facebook.com/IamDilakshana
Twitter.com/IamDilakshana
LinkedIn.com/in/Dilakshana/
Instagram.com/civil_structural_engin/
http://www.dilakshana.com/
Join Linkedin group (Design to Eurocodes) 👉🏻 LinkedIn: 9004030
Join Facebook group (Let’s Talk Civil Engineering) 👉🏻 Facebook: CivilandStructuralEngineer
#Eurocodes #ULS #SLS
Disclaimer: This material is provided on an 'as is' basis without warranty of any kind. There is no warranty that the material will meet your requirements, that the material is error-free, that results obtained from the use of the material will be reliable, nor that any errors in the material will be corrected.
Acknowledgement: This material was developed through a project part-funded by the UK Higher Education Academy under the Northern Ireland Enhancement Fund (grant DCE 620).
Video credit: Queen's University Belfast - http://www.qub.ac.uk
Topics covered in the video:
00:00 - Introduction
+ Use with other Eurocodes
+ Safety factors needed for ULS and SLS verifications
+ Partial factors and combination factors
+ ULS checks (EQU, STR, GEO and FAT)**
+ SLS checks
01:05 - Combinations of Actions (Loads)
+ Permanent actions (Dead loads)
+ Variable actions (Live loads)
+ Accidental actions
01:40 - Combination factors, ψ
+ Equation 6.10
+ Equation 6.10a and 6.10b
+ Factors on actions
04:07 - Ultimate Limit State (ULS) - Combinations of actions
08:05 - Serviceability Limit State (SLS) - Combinations of actions
+ Characteristic combinations (Equation 6.14b)
+ Frequent combination (Equation 6.15b)
+ Quasi-permanent combination (Equation 6.16b)
08:31 - Example
12:02 - Example results (Most critical combination)
**
EQU - static equilibrium
STR - strength/buckling etc,
GEO - failure of excessive deformation of ground,
FAT - fatigue failure
📲 Download my RC Section App 📲
https://apps.apple.com/gb/app/rc-sect...
▶️ Watch Eurocode 3 Series
Part 01 - Introduction to Eurocode 3: Introduction to Eurocode 3 | EC3 | EN...
Part 02 - Introduction to Eurocode 0: Introduction to Eurocode 0 | EC0 | EN...
Part 03 - Eurocode 3 Structural Analysis: Eurocode 3 Structural Analysis | EC3 ...
Part 04 - Brittle Fracture: Brittle Fracture | Eurocode 3 | EC3 |...
Part 05 - Cross-section Classification + Buckling: Cross-section Classification & Resist...
Part 06 - Steel Beam Design - Bending + Example: Steel Beam Design - Bending + Example...
Part 07 - Steel Beam Design - Shear: Steel Beam Design - Shear | Combined ...
Part 08 - Steel Beam Design - SLS: Steel Beam Design - Serviceability Li...
Part 09 - Introduction to Lateral Torsional Buckling: Introduction to Lateral Torsional Buc...
Part 10 - Design Buckling Resistance Moment: How to Calculate Design Buckling Resi...
Part 11 - Design Buckling Resistance Examples: Calculation Examples of Design Buckli...
Part 12 - Steel Column - Compression Member Design: Steel Column Design | Compression Mem...
Part 13 - Steel Column - Buckling Resistance: Steel Column Design | Buckling Resist...
Part 14 - Steel Column - Buckling Example: Steel Column Design - Buckling Exampl...
Part 15 - Tension Member Design - Fastener Design: Steel Tension Member Design | Stagger...
Part 16 - Tension Member Design - Connections: Steel Tension Member Design | Welded ...
Part 17 - Axial Compression, Bending, Torsion: Steel Member Design | Axial Compressi...
Part 18 - Bolted Connections - Pinned & Fixed (Rigid): Steel Connections | Bolted Joint Desi...
Part 19 - Welded Connections - Pinned & Fixed (Rigid): Steel Connections | Welded Joint Desi...
🔔 Connect with Dilakshana Mayadunne 🔔
Facebook.com/IamDilakshana
Twitter.com/IamDilakshana
LinkedIn.com/in/Dilakshana/
Instagram.com/civil_structural_engin/
http://www.dilakshana.com/
Join Linkedin group (Design to Eurocodes) 👉🏻 LinkedIn: 9004030
Join Facebook group (Let’s Talk Civil Engineering) 👉🏻 Facebook: CivilandStructuralEngineer
#Eurocodes #ULS #SLS
Disclaimer: This material is provided on an 'as is' basis without warranty of any kind. There is no warranty that the material will meet your requirements, that the material is error-free, that results obtained from the use of the material will be reliable, nor that any errors in the material will be corrected.
Acknowledgement: This material was developed through a project part-funded by the UK Higher Education Academy under the Northern Ireland Enhancement Fund (grant DCE 620).
Video credit: Queen's University Belfast - http://www.qub.ac.uk
5 سال پیش
در تاریخ 1398/01/14 منتشر شده
است.
56,121
بـار بازدید شده