DIY cheapest plastic bottle extruder, recycle milk jugs into filament Part 3
146.9 هزار بار بازدید -
10 سال پیش
-
see part 1
see part 1
DIY manual plastic bottle extruder, r...
part 2
DIY cheapest plastic bottle extruder,...
DIY HDPE EXTRUDER
recycle your milk jugs and many more things into 3D printable filament
i've hacked a solder iron to make my heating source,
60W !!! way more powerfull than my first attempt
my auger is made of a 15 mm wood drill bit
i made about 3 meters of filament with 1.5 grinded bottles and many losses
the diameter goes from 2 to 4 mm
UPDATE:
heater filament around the iron cartidge
+ insulation coated with orange kapton tape
i also added a motor from an old driller
still need some fine tuning
DIY manual plastic bottle extruder, r...
part 2
DIY cheapest plastic bottle extruder,...
DIY HDPE EXTRUDER
recycle your milk jugs and many more things into 3D printable filament
i've hacked a solder iron to make my heating source,
60W !!! way more powerfull than my first attempt
my auger is made of a 15 mm wood drill bit
i made about 3 meters of filament with 1.5 grinded bottles and many losses
the diameter goes from 2 to 4 mm
UPDATE:
heater filament around the iron cartidge
+ insulation coated with orange kapton tape
i also added a motor from an old driller
still need some fine tuning
10 سال پیش
در تاریخ 1393/04/31 منتشر شده
است.
146,969
بـار بازدید شده