Setting Up Planes - #MastercamMonday
33.6 هزار بار بازدید -
6 سال پیش
-
Today in
Today in #MastercamMonday I show you some basics in setting up planes within Mastercam. In the example part, we have machining operations needed on two sides, requiring two planes with proper orientations. I hope this helps you at some point! #cncprogramming #cncsoftware #mastercam #cadcam
6 سال پیش
در تاریخ 1397/11/08 منتشر شده
است.
33,671
بـار بازدید شده