How to Replace Front Lower Control Arm 1997-2003 Ford F-150

TRQ
TRQ
48.5 هزار بار بازدید - 2 سال پیش - Buy Now!New Control Arm with
Buy Now!
New Control Arm with Ball Joint from 1AAuto.com http://1aau.to/ia/1ASLF00669

This video shows you how to install a front lower control arm on your 1997-2003 Ford F-150. Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear, or integrated ball joints that require replacing the entire arm when they wear.

This process should be similar on the following vehicles:
1997 Ford F-150
1998 Ford F-150
1999 Ford F-150
2000 Ford F-150
2001 Ford F-150
2002 Ford F-150
2003 Ford F-150

Tools you will need:
• 14mm Wrench http://1aau.to/ogN/1AXAA00010
• 15mm Wrench http://1aau.to/ogN/1AXAA00010
• 21mm wrench
• 24mm Wrench
• 13mm Socket http://1aau.to/owU/1AXAA00015
• 14mm Socket http://1aau.to/owU/1AXAA00015
• 15mm Socket http://1aau.to/owU/1AXAA00015
• 18mm Socket http://1aau.to/oj4/1AXAA00043
• 21mm Socket http://1aau.to/oj4/1AXAA00043
• 22mm Socket http://1aau.to/obv/1AXAA00266
• 24mm Socket
• Cutoff Wheel http://1aau.to/om/1AXAA00254
• Side Cutters
• 1/2 Inch Air Impact Gun http://1aau.to/obQ/1AXAA00252
• 3/8 Inch Air Impact Gun
• Air Chisel http://1aau.to/ou/1AXAA00270
• Socket Extensions http://1aau.to/owU/1AXAA00015
• Swivel
• Torque Wrench http://1aau.to/ooU/1AXAA00044
• Anti-Seize Grease
• Hammer http://1aau.to/ogo/1AXAA00091

Subscribe: @trq

Check out our playlist:
Ford F-150 10th Generation 1997-2003: Ford F-150 10th Generation 1997-2003

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content.  No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk.  It is the sole responsibility of the viewer to assume this risk.  TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
2 سال پیش در تاریخ 1401/07/05 منتشر شده است.
48,544 بـار بازدید شده
... بیشتر