How To Re-Install Starter Honda Accord 7th Gen 2007 2006 2005 2006 2004 2003 2.4L w/Intake Manifold
4.3 هزار بار بازدید -
3 سال پیش
-
In this video, young DIY
In this video, young DIY mechanic Aiman will show you how to re-install the engine motor STARTER for 2.4L Honda Accord 2003 2004 2005 & 2006 2007 model years.
Here are the #ad links to some of the tools & parts which might be required to perform this repair:
1. https://amzn.to/3w7f7wm | Milwaukee 2457-20 M12 Cordless 3/8" Sub-Compact 35 ft-Lbs 250 RPM Ratchet w/ Variable Speed Trigger
2. https://amzn.to/3jYdb4w | Crescent 3/8" Drive 72 Tooth Quick Release Flex Head Teardrop Ratchet 11-1/4" - CRW10
3. https://amzn.to/3H6CLhy | New Starter Replacement For Honda Accord 2006-2008 06 07 08, Element 2.0 2.4L & 06 07 08 09 10 11 Civic & Acura 31200-R40-A01 31200-R41-L01 336-2059
4. https://amzn.to/3qmsfwB | DB Electrical 410-54101R Remanufactured Factory Reman Starter Replacement For 2.4L Honda A/T Accord 2003-2005, Element 2003-2006, TSX 04-05 113821 31200-RAA-A51 31200-RAA-A52 RAA43 410-54101 17870 SM612-09
5. https://amzn.to/306w66x | FEL-PRO MS 96473 Intake Manifold Gasket Set
Or Click on Amazon link here and search for what you need: https://amzn.to/3xIOsqg
This is a continuation of the previous video on how to remove the starter. Installation or replacement is basically the reverse of removal. f you are interested to watch that part, click here: How To Remove Starter Honda Accord 20...
This step-by-step tutorial, tips & trick was performed on a 2007 Honda Accord which will require the removal of upper intake manifold which has the air inlet Chamber assembly, which could be helpful for those looking for a guide on how to remove the intake manifold or the Chamber Assembly (Honda 17160-RTA-000). For model years 2003-2005, there is no need to remove the Intake Manifold Inlet (17110-RAA-A10) or the air filter assembly & hoses. We're not sure about the 3.0L VTEC Accord but the process could be the same.
If you car won't start then most likely it is the starter motor. When you turn the key in your car’s ignition, the engine turns over and then cranks. Getting a crank requires a flow of air into the engine, which can only be achieved by creating suction. If your engine isn’t turning over, there’s no air. No air means that fuel can’t combust. The starter motor is responsible for turning the engine over during ignition and allowing everything else to happen. When you turn the ignition on, the starter motor engages and turns the engine over allowing it to suck in air. On the engine, a flywheel, with a ring gear attached around the edge, is fitted to the end of the crankshaft. On the starter, the pinion is designed to fit into the grooves of the ring gear. When you turn the ignition switch, the electromagnet inside the body engages & pushes out a rod to which the pinion is attached. The pinion meets the flywheel and the starter motor turns. This spins the engine over, sucking in air (as well as fuel). As the engine turns over, the starter motor disengages, and the electromagnet stops. The rod retracts into the starter motor once more, taking the pinion out of contact with the flywheel and preventing potential damage.
The primary function of the intake manifold is to evenly distribute the combustion mixture (or just air in a direct injection engine) to each intake port in the cylinder head(s). Even distribution is important to optimize the efficiency and performance of the engine. How Does an Intake Manifold Work? Air travels through the intake and the throttle body into the plenum of the intake manifold. When the intake valve closes, it creates pressure waves that send the air back up the runner. It then bounces off the plenum and comes back into the cylinder when the intake valve opens again.
Obviously, Aiman's auto repair videos are mostly designed for entertainment purposes. Aiman is not a professional and not a certified ASE mechanic. If you're looking for instructions or steps on how to fix or diagnose problems with your car, SUV, minivan or vehicle repair, how to remove, replace or install parts, you should always watch more than just one videos. The videos should always be used only as a guide. Manufacturers always recommend using genuine OEM parts but sometimes cheaper aftermarket can be as good as the originals.
You can watch all of Aiman's auto repair videos in the following playlist: How To Remove Alternator Hyundai Sona...
This video is presented to you by Aiman-Imran Anuar. You can watch more of #Aiman_DIY_Auto_Repair videos on #EyeOnAiman Youtube Channel & Facebook Page.
Note: This video is NOT sponsored. Some product links are affiliate links which means if you buy something we'll receive a small commission. As an Amazon Associate we earn from qualifying purchases (https://www.amazon.com/s?k=eyeonaiman....
Recording Date: August 09, 2021
Video URL: How To Re-Install Starter Honda Accor...
Here are the #ad links to some of the tools & parts which might be required to perform this repair:
1. https://amzn.to/3w7f7wm | Milwaukee 2457-20 M12 Cordless 3/8" Sub-Compact 35 ft-Lbs 250 RPM Ratchet w/ Variable Speed Trigger
2. https://amzn.to/3jYdb4w | Crescent 3/8" Drive 72 Tooth Quick Release Flex Head Teardrop Ratchet 11-1/4" - CRW10
3. https://amzn.to/3H6CLhy | New Starter Replacement For Honda Accord 2006-2008 06 07 08, Element 2.0 2.4L & 06 07 08 09 10 11 Civic & Acura 31200-R40-A01 31200-R41-L01 336-2059
4. https://amzn.to/3qmsfwB | DB Electrical 410-54101R Remanufactured Factory Reman Starter Replacement For 2.4L Honda A/T Accord 2003-2005, Element 2003-2006, TSX 04-05 113821 31200-RAA-A51 31200-RAA-A52 RAA43 410-54101 17870 SM612-09
5. https://amzn.to/306w66x | FEL-PRO MS 96473 Intake Manifold Gasket Set
Or Click on Amazon link here and search for what you need: https://amzn.to/3xIOsqg
This is a continuation of the previous video on how to remove the starter. Installation or replacement is basically the reverse of removal. f you are interested to watch that part, click here: How To Remove Starter Honda Accord 20...
This step-by-step tutorial, tips & trick was performed on a 2007 Honda Accord which will require the removal of upper intake manifold which has the air inlet Chamber assembly, which could be helpful for those looking for a guide on how to remove the intake manifold or the Chamber Assembly (Honda 17160-RTA-000). For model years 2003-2005, there is no need to remove the Intake Manifold Inlet (17110-RAA-A10) or the air filter assembly & hoses. We're not sure about the 3.0L VTEC Accord but the process could be the same.
If you car won't start then most likely it is the starter motor. When you turn the key in your car’s ignition, the engine turns over and then cranks. Getting a crank requires a flow of air into the engine, which can only be achieved by creating suction. If your engine isn’t turning over, there’s no air. No air means that fuel can’t combust. The starter motor is responsible for turning the engine over during ignition and allowing everything else to happen. When you turn the ignition on, the starter motor engages and turns the engine over allowing it to suck in air. On the engine, a flywheel, with a ring gear attached around the edge, is fitted to the end of the crankshaft. On the starter, the pinion is designed to fit into the grooves of the ring gear. When you turn the ignition switch, the electromagnet inside the body engages & pushes out a rod to which the pinion is attached. The pinion meets the flywheel and the starter motor turns. This spins the engine over, sucking in air (as well as fuel). As the engine turns over, the starter motor disengages, and the electromagnet stops. The rod retracts into the starter motor once more, taking the pinion out of contact with the flywheel and preventing potential damage.
The primary function of the intake manifold is to evenly distribute the combustion mixture (or just air in a direct injection engine) to each intake port in the cylinder head(s). Even distribution is important to optimize the efficiency and performance of the engine. How Does an Intake Manifold Work? Air travels through the intake and the throttle body into the plenum of the intake manifold. When the intake valve closes, it creates pressure waves that send the air back up the runner. It then bounces off the plenum and comes back into the cylinder when the intake valve opens again.
Obviously, Aiman's auto repair videos are mostly designed for entertainment purposes. Aiman is not a professional and not a certified ASE mechanic. If you're looking for instructions or steps on how to fix or diagnose problems with your car, SUV, minivan or vehicle repair, how to remove, replace or install parts, you should always watch more than just one videos. The videos should always be used only as a guide. Manufacturers always recommend using genuine OEM parts but sometimes cheaper aftermarket can be as good as the originals.
You can watch all of Aiman's auto repair videos in the following playlist: How To Remove Alternator Hyundai Sona...
This video is presented to you by Aiman-Imran Anuar. You can watch more of #Aiman_DIY_Auto_Repair videos on #EyeOnAiman Youtube Channel & Facebook Page.
Note: This video is NOT sponsored. Some product links are affiliate links which means if you buy something we'll receive a small commission. As an Amazon Associate we earn from qualifying purchases (https://www.amazon.com/s?k=eyeonaiman....
Recording Date: August 09, 2021
Video URL: How To Re-Install Starter Honda Accor...
3 سال پیش
در تاریخ 1400/08/19 منتشر شده
است.
4,361
بـار بازدید شده