Bona® Sand & Finish Training - Chapter 2: Sanding
402 هزار بار بازدید -
9 سال پیش
-
Follow Bona US Professional online:
Follow Bona US Professional online:
Website: https://www.bona.com/en-US/Bona-Profe...
Subscribe on YouTube: https://www.seevid.ir/c/BonaProfess...
Facebook: Facebook: bonauspro
Instagram: Instagram: bona_pro
Experienced hardwood flooring professionals and amateurs alike will find the Bona® Sand & Finish Video Training Series an incredibly useful tool packed with reliable information - straight from the wood floor experts. These videos give a thorough demonstration of the process from start to finish by using Bona's BEST PRACTICES to ensure safety, consistency, quality, and professionalism.
Table of Contents:
00:00 - Introduction
00:39 - Belt Sander Operation
02:50 - Feathering
03:30 - Staggering Start/Stop Position
03:59 - Let's Get Started!
04:25 - Changing the DCS Bags
06:03 - Edger Operation
06:57 - Trim Work
07:06 - Edger Clocking
08:05 - Open Walls: Section Method
08:40 - Butt-End Walls: J-Turn Method
09:04 - Using Work Lights
09:15 - Vacuuming Between Cuts
09:43 - Second Cut
10:08 - Second Cut: Belt Sander
10:15 - Proper Grit Sequence
10:45 - Drum Prep for 2nd Cut
11:06 - Let's Get Started
11:46 - Second Cut: Edger
12:18 - Vacuum Between Cuts
12:32 - To Fill, Or not to Fill...
14:54 - Filler Dry Time
15:12 - Final Cut
16:26 - Transition Area
16:38 - Adjust the Edger Wheels
Website: https://www.bona.com/en-US/Bona-Profe...
Subscribe on YouTube: https://www.seevid.ir/c/BonaProfess...
Facebook: Facebook: bonauspro
Instagram: Instagram: bona_pro
Experienced hardwood flooring professionals and amateurs alike will find the Bona® Sand & Finish Video Training Series an incredibly useful tool packed with reliable information - straight from the wood floor experts. These videos give a thorough demonstration of the process from start to finish by using Bona's BEST PRACTICES to ensure safety, consistency, quality, and professionalism.
Table of Contents:
00:00 - Introduction
00:39 - Belt Sander Operation
02:50 - Feathering
03:30 - Staggering Start/Stop Position
03:59 - Let's Get Started!
04:25 - Changing the DCS Bags
06:03 - Edger Operation
06:57 - Trim Work
07:06 - Edger Clocking
08:05 - Open Walls: Section Method
08:40 - Butt-End Walls: J-Turn Method
09:04 - Using Work Lights
09:15 - Vacuuming Between Cuts
09:43 - Second Cut
10:08 - Second Cut: Belt Sander
10:15 - Proper Grit Sequence
10:45 - Drum Prep for 2nd Cut
11:06 - Let's Get Started
11:46 - Second Cut: Edger
12:18 - Vacuum Between Cuts
12:32 - To Fill, Or not to Fill...
14:54 - Filler Dry Time
15:12 - Final Cut
16:26 - Transition Area
16:38 - Adjust the Edger Wheels
9 سال پیش
در تاریخ 1394/03/25 منتشر شده
است.
402,007
بـار بازدید شده