Making Wooden Maze

Check out the full video on this project - How to Make a Wooden Maze Game on CNC...

Plans for this project are also available here - https://www.toolstoday.com/maze-game-...

I started with the Amana Tool #RC-45711 90° insert carbide v-bit all from our website.
- - - - - - -
#TeamTOOLSTODAY
- - - - - - -
RPM: 18,000
Feed Rate: 40ipm
Plunge Rate: 20ipm
- - - - - - -
I then switched out for the 51441-K 1/16" Spektra™ coated spiral O flute upcut bit to make the holes for the screws to go though.
- - - - - - -
RPM: 18,000
Plunge Rate: 17.5ipm
Spiral ramp down: .125"
- - - - - - -
I then switched out for the 51404-K 1/4" Spektra™ coated spiral O flute upcut bit to cut the remaining profile.
- - - - - - -
RPM: 18,000
Feed Rate: 100ipm
Plunge Rate: 50ipm
Depth of cut: .125"
- - - - - - -
#short #shorts

Tools Used:

STEPCRAFT M.1000 CNC Machine
https://www.toolstoday.com/stepcraft-...
- - - - - - -
Design Software - Vectric V-Carve Pro -
https://www.toolstoday.com/cnc-machin...
- - - - - - -
Amana Tool 45771-K Solid Carbide Spektra Extreme Tool Life Coated 30 Degree Engraving 0.005 Tip Width x 1/4 SHK x 2-1/4 Inch Long Signmaking Router Bit
https://www.toolstoday.com/v-14233-45...
- - - - - - -
** Subscribe - toolstoday

** Shop the website - http://www.toolstoday.com