How To Use the Kaloud Lotus™ with A Large Egyptian Clay Bowl
11.5 هزار بار بازدید -
11 سال پیش
-
Here's a quick tutorial on
Here's a quick tutorial on using he Kaloud Lotus with a Large Egyptian Clay Bowl. Please note, we also have tutorials on using the Kaloud Lotus with the Harmony Bowl, Vortex Bowl, Phunnel Bowl, Alien Bowl, and the Small Clay Bowl.
What you'll need:
1. A heat source to heat up your charcoal
2. Kaloud Pure (Recommended)
3. Shisha (Hookah Tobacco or Steam Stones)
4. Charcoal (We Recommend Coco Charcoal)
5. The Right Bowl (Must have a diameter of at least 2" or 5 cm)
6. The Kaloud Lotus!
Step One:
Pack your bowl according the instructions in this video. If you're not using a Large Egyptian Clay Bowl, we also have tutorials on using the Kaloud Lotus with the Harmony Bowl, Vortex Bowl, Phunnel Bowl, Alien Bowl, and the Small Clay Bowl.
Step Two:
Pack the Shisha loosely "Donut-ing" it so that there is an area towards the center with no Shisha.
Push most of the Shisha to the outer edge so there is no Shisha towards the center and so the bumps on the bottom of the Kaloud Lotus barely touch Shisha
Step Three:
Place the Kaloud Lotus on the Large Egyptian Clay Bowl making sure that at least one of he vents on the bottom of the Kaloud Lotus is over the Shisha
Step Four:
Close the vents to achieve maximum heat and wait a few minutes (it is worth the wait, we promise!
Step Five:
Adjust the vents to adjust heat as necessary.
Enjoy your Kaloud Lotus!!
What you'll need:
1. A heat source to heat up your charcoal
2. Kaloud Pure (Recommended)
3. Shisha (Hookah Tobacco or Steam Stones)
4. Charcoal (We Recommend Coco Charcoal)
5. The Right Bowl (Must have a diameter of at least 2" or 5 cm)
6. The Kaloud Lotus!
Step One:
Pack your bowl according the instructions in this video. If you're not using a Large Egyptian Clay Bowl, we also have tutorials on using the Kaloud Lotus with the Harmony Bowl, Vortex Bowl, Phunnel Bowl, Alien Bowl, and the Small Clay Bowl.
Step Two:
Pack the Shisha loosely "Donut-ing" it so that there is an area towards the center with no Shisha.
Push most of the Shisha to the outer edge so there is no Shisha towards the center and so the bumps on the bottom of the Kaloud Lotus barely touch Shisha
Step Three:
Place the Kaloud Lotus on the Large Egyptian Clay Bowl making sure that at least one of he vents on the bottom of the Kaloud Lotus is over the Shisha
Step Four:
Close the vents to achieve maximum heat and wait a few minutes (it is worth the wait, we promise!
Step Five:
Adjust the vents to adjust heat as necessary.
Enjoy your Kaloud Lotus!!
11 سال پیش
در تاریخ 1392/02/03 منتشر شده
است.
11,597
بـار بازدید شده