COAX F-Connector Stripping, Wiring and Termination of COAX Cable

Discuss the benefits and methods of stripping and terminating COAX Cables.

F Compression connectors will be used for the demonstration.

We will also discuss crimp, screw, and twist-on style connectors.

With details that you will help troubleshoot and terminate them properly.

At: 26:13 on it, I have a higher number is better. This applies to setting the range on the multimeter
with manual resistance settings. When we choose a larger range like 1M Ohm we are more likely to see a zero rather than at a lower range we will see a range of numbers. With continuity, we are seeing if the wire is continuous not what the resistance is, so for people unfamiliar with the use of a meter zero is easier to understand. If you understand resistance a lower range will give you a better understanding of the cable. (This could be important if you are measuring a damaged cable as a very high resistance will not allow the signal through even though the wire has continuity. )