How To Find Out Why Your Power Wheels Battery is Not Charging
367 هزار بار بازدید -
9 سال پیش
-
http://www.techbatterysolutions.com
Wondering why your Power Wheels battery isn’t charging? First, you’ll need to figure out if the charger or the battery itself is the problem. In this video we go over how to test both.
What you’ll need:
- A volt meter (these can be found at your local hardware store for $10-15)
- Power Wheels battery
- Power Wheels charger
- 2 paperclips if you are testing the red Power Wheels battery
Testing the Charger Output:
- Switch the volt meter to the 20 DC side.
- Touch the electrodes to the Power Wheels battery charger (negative to negative, positive to positive)
- You’ll always want the voltage to be higher than the battery. For example, for a 6v battery the voltage should be 7+. For a 12v Power Wheels battery, the voltage should be above 13.5
- Anything less than these voltages will not be able to charge your battery
- Note: This test will not work on the Power Wheels quick charger, stay tuned for a separate video
Testing the Battery:
- This test is similar to how you checked the Power Wheels charger. Place the electrodes against the battery (negative to negative, positive to positive)
- If your battery is below a certain threshold, the charger will not work
- The 12v battery should be at 10.5v+ and the 6v battery should be over 5v. Any lower and you’ll need to replace the battery
- Note: Testing the red Power Wheels battery is a little trickier because the electrodes won’t fit into the slots. You’ll want to first insert paperclips, and then hold the electrodes beside them against the battery
https://www.techbatterysolutions.com/...
Be sure to give us a call if you have any questions, or visit our website: http://www.techbatterysolutions.com.
Wondering why your Power Wheels battery isn’t charging? First, you’ll need to figure out if the charger or the battery itself is the problem. In this video we go over how to test both.
What you’ll need:
- A volt meter (these can be found at your local hardware store for $10-15)
- Power Wheels battery
- Power Wheels charger
- 2 paperclips if you are testing the red Power Wheels battery
Testing the Charger Output:
- Switch the volt meter to the 20 DC side.
- Touch the electrodes to the Power Wheels battery charger (negative to negative, positive to positive)
- You’ll always want the voltage to be higher than the battery. For example, for a 6v battery the voltage should be 7+. For a 12v Power Wheels battery, the voltage should be above 13.5
- Anything less than these voltages will not be able to charge your battery
- Note: This test will not work on the Power Wheels quick charger, stay tuned for a separate video
Testing the Battery:
- This test is similar to how you checked the Power Wheels charger. Place the electrodes against the battery (negative to negative, positive to positive)
- If your battery is below a certain threshold, the charger will not work
- The 12v battery should be at 10.5v+ and the 6v battery should be over 5v. Any lower and you’ll need to replace the battery
- Note: Testing the red Power Wheels battery is a little trickier because the electrodes won’t fit into the slots. You’ll want to first insert paperclips, and then hold the electrodes beside them against the battery
https://www.techbatterysolutions.com/...
Be sure to give us a call if you have any questions, or visit our website: http://www.techbatterysolutions.com.
9 سال پیش
در تاریخ 1394/09/09 منتشر شده
است.
367,050
بـار بازدید شده