How to Make Beginners RC Plane (3 Channel)
137.6 هزار بار بازدید -
5 سال پیش
-
I have many request for
I have many request for releasing a simple RC plane plans for beginners, so I decided to designed one. This plane is designed specifically for beginners that still learn how to fly an RC plane and to familirized the orientation. Beginner tends to broke front propeller so I put the prop on the back. Beginners tend to have slow reflex after taking off so I made the wing with big amount of dihedral angle, about 8 degree. So the plane will autolevel by
itself. Taking off is also pretty easy just push the throttle it will take off by itself without touching elevator or rudder sticks. It also easy to build only uses 2 servos (3 channels) and very robust construction if it built right. It crashed on maiden but it can stand the test and survived.
#rcplane #diyrcplane
You can download the plans on this link below
http://paper-replika.com/index.php?op...
Please SUBSCRIBE and LIKE to support this channel
Playlist :
02:40 Plan Preparation
03:37 Fuselage
10:28 Wing
15:36 Landing Gear
19:51 Electronics
24:38 Motor and Servo Installation
34:50 Finishing Decal and CG
36:21 Maiden
39:01 2nd Flight
39:48 3rd Flight
42:28 4th Flight
43:05 5th Flight
44:53 6th Flight (Handlaunch)
46:16 7th Flight (Handlaunch)
47:47 8th Flight
48:00 9th Fllight
49:08 Review
Specs
- Wingspan : 114 cm / 45 inches
- Fuselage length : 98 cm / 38.6 inches
- Flying weight : 812 gram / 28.6 oz
- Wing Loading : 33.1 gram/dm2 / 10.8 oz/sq.ft
- Wing Area : 24.5 dm2 / 380 sq.in
- Wing cube loading : 6.7
- CG : 6.5 cm / 2.56 inch from LE
Recommended Electronics :
- Any configuration with 28, 22. motor
- 9 inch prop maximum without LG, with LG 8 inch and 7 inch for rough terrain (CW/CCW)
- battery : 3s/4s 1500 - 4500 mah
- 2x servo 9 gram
- ESC 30-40A
- Any TX/RX as long it's hobby grade
Electronic for testing :
- motor Turnigy DST 1200kv
- ESC 50A
- prop CW 7x3.5x3
- Battery Lipo 3S 2200mah & Li-ion 3S 3000mah (LG HG2)
- 2 x 9 gram plastic servo
- TX/RX Turnigy 9X + FRsky DJT
Materials :
- 6 mm Depron (no paper skin)
- 3 mm plywood
- 7 x hot glue sticks
- White packing tape
- Bicycle wheel spoke wire / piano wire (2.5 mm)
- Nylon thread
- CA glue
- 3x 40 cm (1.5 mm) pushrod
- velcro
- bamboo chopsticks
- 6 rubber bands
- 3 x horns
itself. Taking off is also pretty easy just push the throttle it will take off by itself without touching elevator or rudder sticks. It also easy to build only uses 2 servos (3 channels) and very robust construction if it built right. It crashed on maiden but it can stand the test and survived.
#rcplane #diyrcplane
You can download the plans on this link below
http://paper-replika.com/index.php?op...
Please SUBSCRIBE and LIKE to support this channel
Playlist :
02:40 Plan Preparation
03:37 Fuselage
10:28 Wing
15:36 Landing Gear
19:51 Electronics
24:38 Motor and Servo Installation
34:50 Finishing Decal and CG
36:21 Maiden
39:01 2nd Flight
39:48 3rd Flight
42:28 4th Flight
43:05 5th Flight
44:53 6th Flight (Handlaunch)
46:16 7th Flight (Handlaunch)
47:47 8th Flight
48:00 9th Fllight
49:08 Review
Specs
- Wingspan : 114 cm / 45 inches
- Fuselage length : 98 cm / 38.6 inches
- Flying weight : 812 gram / 28.6 oz
- Wing Loading : 33.1 gram/dm2 / 10.8 oz/sq.ft
- Wing Area : 24.5 dm2 / 380 sq.in
- Wing cube loading : 6.7
- CG : 6.5 cm / 2.56 inch from LE
Recommended Electronics :
- Any configuration with 28, 22. motor
- 9 inch prop maximum without LG, with LG 8 inch and 7 inch for rough terrain (CW/CCW)
- battery : 3s/4s 1500 - 4500 mah
- 2x servo 9 gram
- ESC 30-40A
- Any TX/RX as long it's hobby grade
Electronic for testing :
- motor Turnigy DST 1200kv
- ESC 50A
- prop CW 7x3.5x3
- Battery Lipo 3S 2200mah & Li-ion 3S 3000mah (LG HG2)
- 2 x 9 gram plastic servo
- TX/RX Turnigy 9X + FRsky DJT
Materials :
- 6 mm Depron (no paper skin)
- 3 mm plywood
- 7 x hot glue sticks
- White packing tape
- Bicycle wheel spoke wire / piano wire (2.5 mm)
- Nylon thread
- CA glue
- 3x 40 cm (1.5 mm) pushrod
- velcro
- bamboo chopsticks
- 6 rubber bands
- 3 x horns
5 سال پیش
در تاریخ 1398/07/21 منتشر شده
است.
137,663
بـار بازدید شده