Answering Some Questions About the Morso 7110 Wood Stove
626 بار بازدید -
5 ماه پیش
-
I've done a couple other
I've done a couple other videos with this wood stove and had some questions from people that I thought I could answer and address in this one.
The wood stove is a Morso 7110, with the optional fresh air kit. I used some flexible air ducting from AC Infinity to connect to the wood stove, and left it long in the event it got damaged I could just cut it shorter. The chimney is a double wall non insulated inside the house, and double wall insulated outside the house with a T and clean-out. To attach the handle to the wood stove, I had to get a stainless M4 Allen bolt / socket cap screw from the hardware store. I recommend to bring the plastic handle AND the silver piece to the store with you. But even with that I had to cut my screw shorter.
I use a cheap heat powered fan on top of the wood stove, and it actually works pretty good - without using electricity. The fan on the ceiling is 120 volt and I usually run that after the fire is going nicely.
Check out the double bit kindling ax being made:
building a Vintage double bit Kindlin...
Affiliate links below if you're interested in some of the stuff in this video.
MasterBuilt fire starter 48 pack:
https://amzn.to/3vwURrP
Voda heat powered fan:
https://amzn.to/3RRXVpO
Amagabeli indoor firewood rack:
https://amzn.to/48sTadw
The ORIGINAL kindling cracker:
https://amzn.to/3vcPP3B
Thank you for watching!
The wood stove is a Morso 7110, with the optional fresh air kit. I used some flexible air ducting from AC Infinity to connect to the wood stove, and left it long in the event it got damaged I could just cut it shorter. The chimney is a double wall non insulated inside the house, and double wall insulated outside the house with a T and clean-out. To attach the handle to the wood stove, I had to get a stainless M4 Allen bolt / socket cap screw from the hardware store. I recommend to bring the plastic handle AND the silver piece to the store with you. But even with that I had to cut my screw shorter.
I use a cheap heat powered fan on top of the wood stove, and it actually works pretty good - without using electricity. The fan on the ceiling is 120 volt and I usually run that after the fire is going nicely.
Check out the double bit kindling ax being made:
building a Vintage double bit Kindlin...
Affiliate links below if you're interested in some of the stuff in this video.
MasterBuilt fire starter 48 pack:
https://amzn.to/3vwURrP
Voda heat powered fan:
https://amzn.to/3RRXVpO
Amagabeli indoor firewood rack:
https://amzn.to/48sTadw
The ORIGINAL kindling cracker:
https://amzn.to/3vcPP3B
Thank you for watching!
5 ماه پیش
در تاریخ 1402/12/02 منتشر شده
است.
626
بـار بازدید شده