How to Switch Basement Lighting | All About Lights | Ask This Old House
211.8 هزار بار بازدید -
6 سال پیش
-
Ask This Old House master
Ask This Old House master electrician Scott Caron helps a homeowner add switching to basement lights that used to be controlled by a pull string.
#ThisOldHouse #AskTOH
SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse
Time: Less than an hour
Cost: Free
Skill Level: Moderate
Tools:
Lineman’s pliers
Shopping List:
Long composite deck screws
Steps:
1. Before doing any electrical work, ensure the power is turned off at the circuit breaker.
2. It’s best to trace the path of power from the circuit panel to determine which fixtures are receiving constant power and which are receiving switched power.
3. Setting basement lighting to one switch may be as simple as changing the path of power at one splice and require no additional rewiring.
4. When rewiring, updating to an LED fixture can save electricity.
Resources:
All materials for this project, including fixtures, non-metallic wire, and switch can be purchased at a home center or electrical supply house.
Scott installed the 7" Spin Light LED kit fixture (model# 54606242), manufactured by ETI Solid State Lighting (http://www.etissl.com/)
Expert assistance with this project was provided by Caron Electric (http://www.caronelectric.com/).
About This Old House TV:
This Old House is the No. 1 multimedia home enthusiast brand, offering trusted information and expert advice through award-winning television, a highly regarded magazine, and an information-driven website. This Old House and Ask This Old House are produced by This Old House Ventures, LLC and are presented on PBS by WGBH Boston.
Follow This Old House and Ask This Old House:
Facebook: http://bit.ly/ThisOldHouseFB
Twitter: http://bit.ly/ThisOldHouseTwitter
http://bit.ly/AskTOHTwitter
Pinterest: http://bit.ly/ThisOldHousePinterest
Instagram: http://bit.ly/ThisOldHouseIG
Tumblr: http://bit.ly/ThisOldHouseTumblr
How to Switch Basement Lighting | All About Lights | Ask This Old House
thisoldhouse
#ThisOldHouse #AskTOH
SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse
Time: Less than an hour
Cost: Free
Skill Level: Moderate
Tools:
Lineman’s pliers
Shopping List:
Long composite deck screws
Steps:
1. Before doing any electrical work, ensure the power is turned off at the circuit breaker.
2. It’s best to trace the path of power from the circuit panel to determine which fixtures are receiving constant power and which are receiving switched power.
3. Setting basement lighting to one switch may be as simple as changing the path of power at one splice and require no additional rewiring.
4. When rewiring, updating to an LED fixture can save electricity.
Resources:
All materials for this project, including fixtures, non-metallic wire, and switch can be purchased at a home center or electrical supply house.
Scott installed the 7" Spin Light LED kit fixture (model# 54606242), manufactured by ETI Solid State Lighting (http://www.etissl.com/)
Expert assistance with this project was provided by Caron Electric (http://www.caronelectric.com/).
About This Old House TV:
This Old House is the No. 1 multimedia home enthusiast brand, offering trusted information and expert advice through award-winning television, a highly regarded magazine, and an information-driven website. This Old House and Ask This Old House are produced by This Old House Ventures, LLC and are presented on PBS by WGBH Boston.
Follow This Old House and Ask This Old House:
Facebook: http://bit.ly/ThisOldHouseFB
Twitter: http://bit.ly/ThisOldHouseTwitter
http://bit.ly/AskTOHTwitter
Pinterest: http://bit.ly/ThisOldHousePinterest
Instagram: http://bit.ly/ThisOldHouseIG
Tumblr: http://bit.ly/ThisOldHouseTumblr
How to Switch Basement Lighting | All About Lights | Ask This Old House
thisoldhouse
6 سال پیش
در تاریخ 1397/04/15 منتشر شده
است.
211,849
بـار بازدید شده