Autocad dynamic input, what is dynamic input in AutoCAD, How to control Dynamic input tool tip
9.9 هزار بار بازدید -
21 ساعت پیش
-
Hai Friends.
Welcome To UniquE
Hai Friends.
Welcome To UniquE CAD DesigN.
In This Video We Will Discussed About What In “Dynamic Input”.
Commands are the instructions that tell the program what to do.
There are many ways to initiate a command:
1st. Make a selection on a ribbon.
2nd. Enter a command in the command window.
3rd. Enter a command in a dynamic input tooltip.
4th. Drag a custom command from a tool palette.
By Default AutoCAD Commands Entering Starts From the Command Window.
We are Continuously Working Cad 8 To 10 hours, And Our Eyes Are Concentrating On Cursor Point Through The Workflow.
While Selecting The Command, Searching the Command on window Is very Stressing To Our Eyes.
So, I will Recommend All Cad User To Use “Dynamic InPut” Mode Only.
Dynamic tooltips provide an alternative way to enter commands.
When You Starts Typing A Command.
Dynamic input provides a command interface near the cursor in the drawing area.
It Is Very Relaxed Method Of Selecting Commands.
Control Dynamic Input Settings
Type D S. That Is, Drafting Setting.
Go To Dynamic Input.
And Check these 04 Empty Boxes.
Click Ok.
Now Dynamic Input Is Activated.
Use F 12 Function Key To Activate Dynamic input Directly.
And Also By the dynamic input button on the status bar.
Thanks & Regards.
Harish M
UniquE CAD DesigN.
#what_is_dynamic_input_in_AutoCAD
21 ساعت پیش
در تاریخ 1403/07/08 منتشر شده
است.
9,969
بـار بازدید شده